2 Pack Photocell Light Sensor Switch, Swivel Mount, 120-277V AC, Dusk to Dawn Security Light Detection, Hardwired, UL Listed, Photocell Light Control for LED Post Light, Wall Pack, Shoebox Lights Black-120V02

2024-02-24 19:16:18








2 Pack Photocell Light Sensor Switch, Swivel Mount, 120-277V AC, Dusk to Dawn Security Light Detection, Hardwired, UL Listed, Photocell Light Control for LED Post Light, Wall Pack, Shoebox Lights

Photocell Sensor for Post LightFeatures:10 Years Warranty: UL certificate for quality assurance with 10 years, and led light sensor control problems please email us, the reply will send you within 2 hours.Useful Application: Mini photocell light sensor suitable for outdoor lamp post, street lighting, parking lot, shoebox, driveway, pedestrian pathway and landscape lighting.Simple Installation:To test “turn on”during the daytime, cover the exterior photocell sensor’s eye with black tape or other opaque material, the test will take approximately 2 minutes.Technical Details:120VAC voltage of our photocell light control, 10~20Lx on and 30~60Lx off operate level, widely use for electrical boxes and outdoor post lighting.Automatic Control:JL-104 has a gathered swivel with the sensor/switch body for convenient direction adjustment after installation, the additional swivel is also available.Specification:Model No.: JL-104Rated Voltage: 120VACRated Frequency: 50/60HzRated Loading: 500W TUNGSTEN, 850VA BALLASTOperate Level: 10-20Lx on, 10-20Lx offAmbient Temperature: -40℃~70℃Related Humidity: 95%RHPackage Include: 1 pc pack in a carton.Tips:Ensure the fixed with the right connection between photocell light control and outdoor led light, pay attention to safety during operation. It is normal for the SWITCH to take several minutes to turn off when first installed.Do not cover with finger because light traveling through fingers may be great enough to keep the switch open. The operation of this switch is not affected by weather, moisture or temperature changes.

Product Features

  • Energy Saving: Photocell light sensor switch designed on the basis of an electrical heating structure that provides time delay over 30 seconds to avoid redundant switching against the spotlight or lightning during the night time.
  • General Specifications: Surge protection available, light control help to protect the lamp from the lightening. 120VAC, 50/60Hz, 15A 1800W tungsten, 9.2A, 1100VA Ballast, waterproof IP65 rating, 10~20Lx On (Dusk), 30~60Lx Off (Dawn).
  • Easy to Install: Photocell sensor for post light just need to plug in a base, twist lock plug for quick installation. Disconnect power, place screw thread of the SWITCH in the knockout hole and fasten with rubber gasket and zinc alloy lock-nut.
  • Wide Application: The photoelectric switch JL-104 is applicable to control the outdoor lighting, exterior lighting, street lighting, passage lighting, and doorway lighting automatically in accordance with the ambient lighting level.
  • 10 years Warranty: Provides consistent performance regardless of the ambient temperature, cover with UL certificate can assure you a 10 years warranty about the photocell sensor switch. Any questions feel free to email us at any time.

Tags:dingo

Title - Default Title

如果有任何关于网站的意见,可以QQ联系或者发邮箱。

tags - tags - tags - tags - tags - tags - tags - tags - tags - tags - tags - tags - tags - tags - tags -