6 Channel Digital Servo Tester with Over-Current Protection
(1) Use high-precision six potentiometers, which can control the corresponding six servos simultaneously. (2) The 0th, 1st, 2nd and 3rd connectors have over-current protection to prevent servo from burning out due to over-current. (3) There is a small button under each knob. If you press it, the corresponding servo will come to middle position. In this status, the knob cannot control the servo rotation. It can control servo rotation again after the button being pressed. (4) "+" Connect to 5-8.4V power supply. (5) "-" Connect to power supply cathode Note: The voltage that the tester require should correspond to the voltage required by a servo that you controlled
Product Features
- Dimension : 76mm*53mm(2.99in*2.09in); Weight: 37g (1.31oz)
- Use high-precision six potentiometers, which can control the corresponding six servos simultaneously
- The 0th, 1st, 2nd and 3rd interface have over-current protection to avoid burning out servo due to over-current
- The voltage that the controller require should correspond to the voltage required by a servo that you controlled
- There is a small button under each knob of controller, press it, the servo will return to the center of the state, the knob can not control the servo rotation; then press it, remove the center of the state, the knob can continue to control the servo rotation
Tags:dingo
Title - Default Title