6 in 1 Aquarium Test Strips,100 Strips Fish Tank Test Kit for Testing PH Nitrite Nitrate Chlorine General & Carbonate Hardness, Accurate Saltwater and Freshwater Aquarium Water Testing
Products Introduction Aquarium test strips 6 in 1 is the optimum test kit, one trip performs six important tests. In just about one minute you will know your water's General Hardness, Nitrite, Nitrate, pH, Carbonate Hardness, and Chlorine levels. Take a close look at a aquarium 6 in 1 test strip There are six pads on each test strip. each pad checks a different condition of the water. The test pads work by changing color to indicate the conditions of the aquarium. Warm Notices? 1: Keep wet fingers out of the bottle. 2: Avoid touching or polluting the test area of strip. 3: Close cap tightly after removing strips. 4: For best results read in natural daylight. 5: Store in a cool dry place. Steps for usage 1?Immerse the strip for 2 seconds and then remove the strip. 2: Do not shake excess water off, and then hold the strip horizontally for 60 seconds. 3: Compare against the color chart and read immediately within 30 seconds to get accurate readings.
Product Features
- High-efficiency Test SuiteThis is a 6-in-1 aquarium test kit. The test strip can monitor 6 elements at once, including: total hardness, nitrate, nitrite, free chlorine, carbonate and pH value. Then you can accurately determine whether your fish tank is healthy water.
- Wide Range of ApplicationsThe test strip sets are widely used in fish tanks, ponds, shrimp tanks and other aquariums. It is a good helper for quickly and accurately detecting water quality. Research shows that your aquarium should be tested at least twice a week to verify water quality and prevent fish loss.
- High-quality MaterialThe aquarium test strips are made of high-quality fiber paper and non-bleeding plastic pad. After research and design by experienced experts, the test paper will not bleed, and the results can be obtained quickly and accurately.
- Easy to Use & Read Immerse the aquarium test paper in the water and take it out after 2 seconds. Place it horizontally for 60 seconds and compare with the color chart on the bottle. It is necessary to complete the reading within 30 seconds to obtain accurate water quality results.
- Sealed Package100 water quality test strips are contained in a closed bottle, which can perform 100 tests on your aquarium. After each test strip is taken, the bottle cap should be tightened in time to prevent the test strip from being contaminated by water.
Tags:pets_uk_update042022
Title - Default Title