Aquarium Water Clean Clear Lamp Green Killing Machine w/ Protect Shell Fits 20-200 Gallon Fish Tank Waterproof Light for Sump Pond Pump Filter 5W 254nm (Pump not Included, lamp is Inside The Shell)

Description

Let this aquarium light be your helper in maintaining the water environment of your fish tank. Aquarium clean light Parameters Model: CTUV-H5/ CTUV-H5B Wattage: 5W Voltage: 110-120V/60HZ Wavelength: 254nm Waterproof level: IP68 Built-in leakage protection device Glass material: quartz Control method: convenient on/off switch 360° efficient water purification Why do we need to use it? Good water quality can greatly reduce the risk of fish getting sick in the water.Make turbid aquarium water clean and fresh.Can easily solve the problem of water odor and green clean.Reduce the number of water changes in the fish tank, making maintenance easier and more convenient. How does it work? The emitted 254nm light destroy the DNA structure of intact microorganisms, making them lose their ability to reproduce and die, restoring a healthy water environment. Read more Get rids of green and a-lgae, keep your water health and clean. 254nm wavelength light Efficiently destroy the cell structure, the fish tank becomes clear.254nm wavelength light works well. IP (Ingress protection) 68 The first number 6 represents the dustproof level (level0-6), the second number 8 represents the waterproof level (0-8).The higher the level, the better the effect. Wide range of applications In general, it is recommended to use no more than 2 hours a day.It takes a process to take effect after use, and there will be obvious results in about 2-5 days. Read more High quality quartz glass tube The transmittance of visible light is above 93%, especially in the U/V spectral region, the transmittance can reach above 96%. High performance Keep the lamp in stable operation and long life.Each lamp has been rigorously tested before it is issued to ensure that it works before it is issued. the white particles in the tube It‘s Mercury(Hg)，not a quality issueAfter the electricity is turned on, the mercury liquid is heated and sublimated into mercury vapor, which diffuses in the lamp body. The current on both sides will pass through it to form a loop, and the arc light will become the light we see under its illumination. Read more Read more User's guidance: Please measure tank size and filter length before purchasing.Normal situation: 3-4 times a week, about 1 hour each time.Excessive green and have diseased fish: 1-2 hours per day until symptoms are small and normal use is possible. How to use this lamp?-Where should I install it?Please confirm the model you purchased;If it is CTUV-H5： Install this light in the filter system of a fish tank or pond. Do not put it directly into the fish living area.A separate space in the aquarium/pond is separated from the fish living area by an opaque baffle.Ensure water flow in areas where lights are used. If it is CTUV-H5B： Please compare carefully to see if the size is right for your filter pump before purchasing.Use with your filter or pump, just need to connect the inlet pipe of pump and filter, suitable for pipe diameter 15-17mm. Results are visible in about 2-5 days. FAQs1.Q: How long should it run each day?A: In most cases, it is enough to open it for 1-2 hours a day, but the most important thing is depending on the water quality in the aquarium.If it is the first time to use this fish tank light, and the water in the tank has green, or looks very turbid, you can open it continuously for 24-48 hours the first time, until the water in the tank becomes clear, and then use it (once 1-2 hours) every day or every other day, to maintain the good condition of the water.Of course, different fish tanks have different conditions, such as each fish tank has different types of fish, different numbers, different fish food to eat every day. If fish eat more, it pulls out more manure, then you need to use this lamp longer. Although 1-2 hours a day can be applied for most fish tanks, the best way is to decide how long to use this lamp per day according to the water quality of the fish tank. You also can try many times, such as opening it for 1 hour every day. If the water can maintain a clear state, then don't need to open it for 2 hours. 2.Q: How to use this lamp? - Where should I install it?A: It is best to install this light in the filter system of the fish tank or pond. It can't be put directly into the fish living area, otherwise the rays will hurt the fish and plant.It is recommended to use it in these places:1. In the filter box/water tank.2. Fish tank/pond entrance.3.A separate space in the aquarium/ pond is separated from the fish living area by an opaque baffle. Instructions 1: Fix the lamp with strong suction fittings.Put the whole lamp into the drawer (opaque drawer).Close the drawer, plug in the cable, and turn on the switch.Don't look at the light directly, you can leave and wait about 30 minutes to turn off the switch.Open the drawer and wait for about 30 minutes. Instructions 2: Put the whole lamp into the wardrobe (opaque).Close the wardrobe, plug in the data cable, and turn on the switch.Don't look directly at the light, leave and wait about 30 minutes to turn off the light.Open the drawer and wait about 30 minutes (once a week is recommended). As you know, a fish tank needs to change the water in time. When changing the water for the fish tank, it needs to stand for more than 48 hours, but use this lamp to treat the new water before changing the water is a good idea.

Features:

• Crystal Clear This aquarium clean lamp is used in cloudy / foggy water fish tank. Fish tank lamp can clean 99.99% green or grown.The 254nm wavelength light can effectively clean the green in aquarium, efficient and time-saving, suggest that use the light 1-2 hours once in 2-5 days.
• Reduce Odor The fish tank clean light can minimize odor in fish tank, once the aquarium is full of green will be accompanied by the bad smell, this aquarium clean light can reduce the smell in the fish tank.
• Purified Water As you know, a fish tank needs to change the water in time. When changing the water for the fish tank, it needs to stand for more than 48 hours, but use this lamp to treat the new water before changing the water is a good idea.
• NOTE/Very ImportantIt takes a process to clean up green a-lgae, please be patient for 2-5 days. Please measure the size of your fish tank and compare it with the size of our products.
• 1 Year Warranty We offer you an 8000 hour warranty and friendly customer service. After you receive the milky white fog clears aquarium lamp, if you are not satisfied with our green clean light, please contact the email on the packaging. We will provide a satisfactory solution for you.

Tags:pets_update_June2022

Title - Default Title