Automotive-leader 234-9012 4-Wire Air Fuel Ratio Sensor Upstream Oxygen O2 Sensor 1 Bank 2 for Toyota Sienna CE, LE, XLE, Limited Mini Passenger 3.5L-V6 3.3L-V6 Gas 2004-2010 89467-08040 234 9012

Automotive-leader 234-9012 4-Wire Air Fuel Ratio Sensor Upstream Oxygen O2 Sensor 1 Bank 2 for Toyota Sienna CE, LE, XLE, Limited Mini Passenger 3.5L-V6 3.3L-V6 Gas 2004-2010 89467-08040 234 9012

Automotive-leader Brand Our have own professional R&D design team dedicated to creating quality products, providing customers with affordable products and a good shopping experience. Automotive-leader Brand's products are 100% brand new aftermarket products.The Automotive-leader brand has cooperated with many foreign factories and directly purchased the original chips. After the development and processing by domestic professional teams, accuracy meet the professional specification as OEM standard, making it easy to installation & direct plug-in replacement and use high temperature corrosion resistant materials can extend the life of the product. Vehicle Compatible Replacement for 2004 Toyota Sienna XLE Mini Passenger Van 5-Door 3.3L 3300CC 202Cu. In. V6 GAS DOHC Naturally Aspirated Replacement for 2005 Toyota Sienna CE Mini Cargo Van 5-Door 3.3L 3300CC 202Cu. In. V6 GAS DOHC Naturally Aspirated Replacement for 2006 Toyota Sienna Limited Mini Passenger Van 4-Door 3.3L 3300CC 202Cu. In. V6 GAS DOHC Naturally Aspirated Replacement for 2007 Toyota Sienna CE, LE, XLE, Limited Mini Passenger Van 4-Door 3.5L 3496CC 213Cu. In. V6 GAS DOHC Naturally Aspirated Replacement for 2007-2010 Toyota Sienna CE Mini Cargo Van 5-Door 3.5L 3456CC V6 GAS DOHC Naturally Aspirated Replacement for 2007-2010 Toyota Sienna CE, LE, XLE, Limited Mini Passenger Van 4-Door 3.5L 3456CC V6 GAS DOHC Naturally Aspirated Replacement for 2007-2010 Toyota Sienna CE, LE, Limited Mini Passenger Van 5-Door 3.5L 3456CC V6 GAS DOHC Naturally Aspirated Replacement for 2007-2008 Toyota Sienna XLE Mini Passenger Van 5-Door 3.5L 3456CC V6 GAS DOHC Naturally Aspirated Replacement for 2004-2006 Toyota Sienna CE, LE Mini Passenger Van 5-Door 3.3L 3300CC 202Cu. In. V6 GAS DOHC Naturally Aspirated Replacement for 2004-2006 Toyota Sienna XLE, LE Mini Passenger Van 4-Door 3.3L 3300CC 202Cu. In. V6 GAS DOHC Naturally Aspirated Replacement for 2004-2005 Toyota Sienna CE Mini Passenger Van 4-Door 3.3L 3300CC 202Cu. In. V6 GAS DOHC Naturally Aspirated Replacement for 2004-2005 Toyota Sienna XLE Limited Mini Passenger Van 4/5-Door 3.3L 3300CC 202Cu. In. V6 GAS DOHC Naturally Aspirated Replace Part Number : 2349 89467-08040 89467 0840 Tips Please confirm the part number and your vehicle information (e.g Year, Make, Model) & Engine (e.g. California emission or California emission) before placing an order. Product Feature Oxygen Sensor Probe: Improve fuel economy efficiency Reduce the emission of harmful substances Heat up quickly to help the engine get into work faster. Oxygen Sensor Plug: Easy to Install, direct Plug-In Replacement. Convenient to use. Read more 234-9012 Oxygen Sensor Specifications Package Content : 1Pcs 234-9012 Oxygen Sensor Placement on Vehicle : Upstream, Front, Pre-cat Thread Diameter : 0.711 in. Wire Quantity : 4 Wires Wire Harness Length : 7.09 In. Sensor Type : Heated Connector Gender : Male Grade Type : Regular Universal Or Specific Fit : Specific There may be a gap of 1-3mm by manual measurement, please understand ! Read more Automotive- leader Brand Oxygen Sensor Feature : Brand New Aftermarket Oxygen Sensor Fast Response & Speed & Stable Performance & Longer Service Life High-quality materials used, enhance durability performance 100% Rigorous Tested Before On Sale & Shipment Meet The Professional Specification As OEM Standard Please check the fitment notes for Oxygen sensor installation location information！！！ Bank 1 Sensor 1 means Upstream Right/Rear Bank 2 Sensor 1 means Upstream Left/Front Bank 1 Sensor 2 means Downstream Right/Rear Bank 2 Sensor 2 means Downstream Left/Front sensor 1=Upstream sensor 2=Downstream Why choose Automotive-leader Brand Oxygen Sensor ? Laser welding: ensure correct installationPorous PTFE filter: Allows atmospheric oxygen to enter the sensor, but does not allow water or engine contaminants to penetrate the housing.Double protective cover: Maintain proper equipment temperature to speed up response time and protect ceramic components from silicone and lead poisoning.Stainless steel housing: The sturdy, watertight body prevents corrosion and pollution, and maximizes engine performance and fuel efficiency while reducing fuel consumption and harmful emissionsThe aluminum oxide trap layer is exclusively designed by our team to keep the silicone and lead outside the ceramic to prevent damage to the platinum electrode. Oxygen Sensor Installation Steps: Diagnostic trouble codes to identify the faulty sensor Test zero status with the multimeter and select several points to measure the signal output, Normal output is no problem.Disconnect the oxygen sensor, Remove the oxygen sensor Remove the cover, slowly unscrew the oxygen sensor plug before opening the triangle iron can see their own oxygen sensor.Compare the oxygen sensor The problem can be seen by comparing the removed sensor with the newly purchased oxygen sensor.Install the new sensor and connect the harness Install the new oxygen sensor according to the position of the original oxygen sensor, Screw the plug to the joint.Clear the codes then start the vehicle After the installation is completed, start the vehicle and check whether it is running normally Product Details Improve Fuel Efficiency & Reduce Pollution Emissions Adhere to the refusal to use low-cost manufacturing materials that are harmful to human health, improve fuel efficiency, save fuel costs, and reduce emissions of pollutants and harmful gases. Stable & Powerful Performance Our oxygen sensor is made of high quality stainless steel platinum pulp, porous polytetrafluoroethylene, fluororubber, alumina, high grade platinum, ceramics and other materials. The oxygen ion reaction is more sensitive, the light-off time is extremely short, the reaction is rapid, and it is less affected by water mist and stains. Nernst Principle & Optimized Engine We have a professional team to study the design of smooth appearance, direct procurement of the original core chip, and high temperature corrosion resistant material optimized engine, performance more stable. Safe Escort & Extending Service Life The service life of the optimized oxygen sensor developed by the professional team is stronger than that of the general oxygen sensor, reducing the cost of daily care and maintenance for customers. Read more Please Check The Three-way Catalytic Converter And Oxygen Sensor Before Replacing The Oxygen Sensor Light Fault Lamp Three-way Catalytic Failure Engine Oil Jams Oxygen sensor Probe Is Contaminated Oxygen Sensor Poisoning and Contaminated Performance Lead Poisoning Features: The surface of the protective tube has a shiny rust layer. Cause: Use leaded gasoline. Silicon Poisoning Features: The protective tube deposit color is between bright white and granular light gray.Cause: Silicon compounds are present in some sealing materials,lubricants and antifreeze corrosion inhibitors. Antifreeze Pollution Causes: Antifreeze leaks from the cylinder head to the engine for combustion. Oil Pollution Features: The surface of the protective tube is covered with a layer of white or gray-black oily deposits. Causes: Fuel additives or oil enter the engine for combustion. Please Note When the fault light is on,Please Check The Three-way Catalytic Converter And Oxygen Sensor Before Replacing The Oxygen Sensor.If the oxygen sensor fault light is on again shortly after the oxygen sensor is replaced, it is necessary to check for carbon contamination and clean the inlet and combustion chambers. Read more

Product Features

• Warranty2 Years. (Improve fuel efficiency & Stable performance & Durable)
• Placement on VehicleUpstream/Front Sensor 1 Bank 2 Sensor Type : Heated. Wire Count : 4-Wire Wire Harness Length:7.09 In.
• Direct Fit Application234-9012 upstream air fuel ratio sensor for Toyota Sienna CE, LE, XLE, Limited Mini Passenger 3.5L-V6, for Toyota Sienna CE, LE, XLE, Limited Mini Passenger 3.3L-V6 GAS 2004 2005 2006 2007 2008 2009 2010
• FeatureImprove Fuel Efficiency & Stable Performance & Durable & Meet the professional specification as OEM standard with Laser weld and Viton sealing system & Reduce CO2 and other harmful emissions,extend expensive Catalytic Converter life.
• Service GuaranteedMust pass a rigorous professional practice loading test before sale and shipment. 100% satisfaction after sale services and technical assistance. Please rest assured to purchase.If you have any questions, contact with us, we will reply you in 24 hours and offer the solve way for you.Hope you have a good shopping!

Tags:workwarehouse

Title - Default Title