BEYIMEI PCIe SATA Card 6 Ports, 6 Gbps SATA 3.0 PCIe Card,PCIe to SATA Controller Expansion Card, SATA 3.0 Non-Raid,with 6 SATA Cables and Low Profile Bracket（Marvell 88SE9215
Size:PCI-E 1X 6SATA Product Name: 6-Port SATA3.0 Expansion Card Product Root: Marvell 9215 +1093 Product Interface: PCI-E 1X Support System: WIN8.x / WIN10 / Windows Server 2008R2 / 2012/2016/2019 / Linux 2.6.x to 4.x Conforms to Serial ATA 3.0 specification, backward compatible with SATA2.0 SATA1.0 Follow PCI-Express v2.0 specification and backward compatible with PCI-Express v1 .0. Supports 6.0 Gbit / s, 3.0 Gbit / s and 1.5 Gbit / s communication speeds Supports Gen 1i, Gen 1x, Gen 2i, Gen 2m, Gen 2x and Gen 3i. Supports the AHCI1.0 mode and IDE mode Native command queue support (NCQ) Support FIS based on port multiplier switch or command switch. Support hot hot swap. Compatible with SATA6G, 3G and 1.5G hard drives System requirements: A PCI Express 1x slot is available that supports 1x / 4x / 8x / 16x Information on the speed description 1. The best effect can be achieved with the SATA3.0 data cable. 2. The setting of the motherboard BOIS: SATA mode should be changed to AHCI. Although some motherboards are PCIE version 2.0, by default BOIS does not enable gen2 high speed mode, which must be enabled manually. The fastest speed of PCI-E 2.0 is 380-450 m / s. When connected to PCI-E1.0, the speed is only 200-300 m / s. Different computer configurations and SATA SSDs have different speeds. 3. SATA ports slow down when used at the same time. This is not for users looking for speed. They are only used for expansion hard disk interfaces. Packing list 1 x PCIe X1 to 6 SATA 3.0 card 6 x SATA cables 1x 15pin SATA power splitter cable (1 to 4 SATA connector) 1 x low-profile bracket 1 x manual
Product Features
- 6 Ports Adapter Card --- This PCIE SATA card allows you to add 6 SATA 3.0 6Gbps devices to your computer. You could make the system to boot from this SATA card but non RAID, (The RAID in INTEL is only for native SATA and can be grouped. It is an expansion card that cannot support third-party chips).
- Product chip --- Using the Marvell 88SE9215 + 1093 chip enhances heat dissipation, long-lasting high temperature resistance and more stable operation.
- Support system --- WINXP/ WIN7/ WIN8 /WIN10/ LINUX
- Support interface: There is an available PCI Express X1 slot, while supporting PCI-E X2 /X4/ X8/ X16 (This SATA 3.0 expansion card is only suitable for motherboard slots via PCI-E . Do not apply to PCI slots).
- This PCIe 1X 6SATA expansion card contains Included 6x SATA cables and 1x 15pin SATA power splitter cable, make connection easier.(Synology can only recognize 4 disks)
Tags:cocoon
Size - PCI-E 1X 6SATA