Combination Smoke and Carbon Monoxide Detector,Dual Sensor CO Smoke Alarm Detector with LCD Display and Sound Warning for Home,Kitchen,Office,School Complies with UL 217 & UL 2034 Standards
Detection gas: smoke + carbon monoxide Power supply: 3 1.5VAA battery (Note:Battery is not in the package) Power consumption: ≤3W Our CO smoke detector is suitable for indoor places such as villas, Home,shopping malls, warehouses, factories, office buildings, etc. CO smoke detector installation steps: 1. Please not be installed in the following places: a1: Places where smoke is normally trapped a2: Places with relative humidity greater than 95% a3: Places with large dust, water mist and oil mist pollution a4: Places with high wind speed (greater than 5 m / s) 2.Recommened to use it in Home, bedroom, Bathroom,living room,hallway, basement, car or anywhere people stay for a long time. 3. Please put the battery into the compartment correctly according to the indication. 4. Please choose the suitable location, Generally installed in the center of ceiling in the detection space. and fix the detector base to the selected installation location with the installation mounting screws.
Product Features
- 2 in 1 detector: It can be served as both Smoke detector and carbon monoxide detector alarm to detect the threat from these two harmful chemicals,Very suitable for carbon monoxide gas leakage and fire place, Once the smoke and carbon monoxide detector detects these two gases, they will beep.
- Accurate ,Reliable,High Sensitive & Quick Responsive: Equipped with electrochemical CO sensors and photoelectric smoke sensor that work independently of each other,Which detects the larger particles of a smoldering fires.When carbon monoxide and smoke rise to alarm levels, the alarm provides a clear, loud warning when it is discovered.Photoelectric Sensor Detects Smoke, Smoke Detector While Minimizing false alarms
- LCD Digital Displays&Widely Used:When the fire smoke alarm detects smoke fire or detectes concentration of carbon monoxide exceeding the standard value,the LCD display will show the current value of the gas concentration, Meanwhile emit an alarm sound of 80 decibels, and the ring light flashes rapidly! Suitable for all the Place Possible to Produce Carbon Monoxide and Smoke, Such as your Home,Bedroom,Bathroom,living room, Hotel
- Test Button: Malfunction and low battery warnings allow you to easily know the working status of the alarm; Test button enables (silent mode)you to test the alarm weekly, When encountering a non-emergency situation(false alarms occur),you can immediately press the test button and the LED light will flash cyclically, indicating that it has entered the silent mode. The LED light flashes once every 10 seconds, indicating that the alarm has entered the silent mode
- Quick,Easy Installation : Battery operated device Can be easily installed and maintained without the need for an electrician,Easy to mount on any wall or ceiling with the included screws; When the Power is Close to Run out, You Can Hear the low power alarm ,the red light flashe time at every 10 seconds, and the LCD display "Lb". and wont Miss the Chance to Change the New Battery. Note:Battery is not in the package
Tags:workwarehouse
Title - Default Title