DC6-12V to 10,000V High Voltage Pulse Generator Inverter Super Arc Pulse Ignition Module for Science Experiment Electronic Instrument(901-c2)
Specification: Model(Optional): 901-2(work continuously for 10s), 901-c2(work continuously for 1 min) (Note: it is strictly forbidden to exceed working time) Input voltage: DC6-12V Input current: 1A-3A (related to voltage) High pressure type: pulse high and low pressure integrated type Output voltage: approx. 0.5-1 million V(please pay attention to safety when using) Discharge distance between high pressure poles: 10-20mm Output high-voltage wire length: approx.100mm Input power wire length: approx. 100mm (the red wire is positive) Size:8625mm/3.41in Weight: Approx.63g~72g/2.2oz~2.5oz Note: 1.Avoid high- voltage no-load power supply. (it is necessary to adjust the appropriate distance of the high-voltage cable end before energizing. The distance of the high-voltage cable to pull the arc is directly proportional to the voltage and capacity of the battery used. When measuring arc distance, the test shall be conducted from short to long. 2.Power is strictly forbidden when exceeding the maximum arc distance. As the high voltage energy cannot be released, modules are easily damaged. 3.About the input power: 2 pcs3.7-v lithium battery can be used in series, such as 18650 battery, idle cell phone battery (to remove the protection board, recommended capacity above 2000mAh) or Nickel-cadmium/Ni-mh battery pack, or 6V lead Acid batteries.
Product Features
- PRACTICAL USE: With 6-12v high power, instant ignite cigarette & paper, can work continuously for 10-60 seconds (depending on the model), and high frequency, good quality, easy to operate and for your project.
- WIDE APPLICATION: The module can be used as high school science experiments, electronic equipment, negative ion generator, high voltage source to use when making small science.
- HIGH VOLTAGE: This module is a small production with high-pressure science inverter transformer/boo ster finished module, the input terminal DC 6V-12V voltage can get 10,000 kV DC high voltage at the output.
- SCIENTIFIC DESIGN: According to the tesla coil principle, the module outputs high voltage pulse current, small volume and high efficiency.The peripheral circuit is simple (simply connect the switch, Install the battery), the discharge strength is violent.
- SAFE USE: Avoid high-voltage no-load power supply. it is necessary to adjust the appropriate distance of the high-voltage cable end before energizing. When measuring arc distance, the test shall be conducted from short to long. When exceeding the maximum arc distance, it is strictly forbidden to power on and damage the module.
Tags:dingo
Title - Default Title