ESUMIC 5PCS TEC1-12704 Thermoelectric Cooler Heat Sink Cooling Peltier Module 12V 36W
Used for many applications from CPU coolers to alternate power sources. Great for your own custom car drink warmer/cooler as well. Features: - It heats one side while simultaneously cooling on the other. - You can use multiple ones in series or parallel. - You may glue (use thermal glue) it right on to the chip or whatever you want. - You can reverse the polarity and thus switch which side gets cold and which gets hot. Specification: - Model: TEC1-12704 - Size: Approx. 40mm x 40mm x 4.0mm - Voltage: DC 12V - Max Power: 36W - Imax (A): 4A - Power Cord : 300mm - Red wire to the positive, black wire to the negative How to Use: - Prepare five things, Thermoelectric Cooler + heatsink + Grease + potholder + power. - Coated with silicone grease on both sides of the thermoelectric cooler. - Place the thermoelectric cooler on a heat sink with a potholder in the middle. - Tighten the screws. Powered, and it starts cooling. Please Note: - When installing, please pay attention to clean and flat surfaces - Use only with the use of thermal grease - Only in combination with a sufficiently dimensioned heat sink Packing Contain: 5PCS x TEC1-12704Thermoelectric Cooler
Product Features
- ModelTEC1-12704. Size: 40 mm x 40 mm x 4 mm. Fitted with 30cm insulated leads.
- ApplicationGet ice cold in minutes or heat to boiling by simply reversing the polarity, used in many occasions or even your own custom car drink hot/cooler.
- Material Mainly consisting of sandwich semiconductor material between the ceramic plates and have no moving parts.
- Performance Each device is full and inspected tested. Easy to install and use.
- AttentionThese devices must be used in conjunction with a heat sink to avoid burned.
Tags:cocoon
Title - Default Title