eSUN 3D Printing Filament Vacuum Storage Kit, Spool Storage Sealing Bags Dust Proof Humidity Resistant for Keeping Filament Dry, 10 Vaccum Bags / Kit, 33 x 40cm

eSUN 3D Printing Filament Vacuum Storage Kit, Spool Storage Sealing Bags Dust Proof Humidity Resistant for Keeping Filament Dry, 10 Vaccum Bags / Kit, 33 x 40cm

eSUN 3D Printing Filament Vacuum Storage Kit, Spool Storage Sealing Bags Dust Proof Humidity Resistant for Keeping Filament Dry, 10 Bags 33 x 40cm 10 vaccum bags in total, which can satisfy storing 10 filament at one time. Space -saving and maximize the use of vaccum bags. Double seal design, single side embossing treatment with good sealing.Moisture-proof and dust-proof to ensure the printing quality of consumables. BPA-FREE and FDA-certified food-grade PE+PA composite material, strong and durable, recyclable, safe and do no harm to environment. Read more Micropore design of vaccum bags which can ensure sealing better than others. Lightweight hand pump and easy to use.Save time and effort when pumping. Rubber desin of the hand pump,which is easy to pump. Read more Note: a. After the zipper has been clamped once, you can use it again by hand; b. You must press the air valve by hand after each air extraction to ensure that there is no air in the air valve; c.If the manual pumping is slow, you can squeeze out a part of the air before pumping, and we will launch an electric pumping device soon. FAQ The vacuum bag cannot be vacuumed or air leakage occurs after vacuum: A. Check if the bag is not completely sealed Solutions: Open the zipper of the bag and reseal the zipper with the sealing clip to ensure that the zipper is completely closed B. Check if the air valve is not placed on a flat surface when pumping air Solutions: Re-lay the bag air valve C. Check if the suction port of the hand pump is not in full contact with the air valve Solutions: Ensure that the suction port is placed flat above the air valve at the appropriate pressure D.Check if the pressure of the suction port on the air valve is too large Solutions: Adjust the pressure of the hand pump E. Check if the air valve is not completely closed Solutions: Press the air valve with your finger after vacuuming F.Check if the vacuum bag is damaged Solutions: Replace the vacuum bag

Product Features

• Package ListOne eSUN vaccum kit includes Vacuum Bag*10, Hand Pump*1, Sealing Clip*2, Desiccant*15, User Manual *1. One kit 43pcs in total, which can satisfy storaging 10 used filaments at the same time.
• Humidity Resistant & Good Sealing EffectThe vaccum bags apply bilateral sealing and single side embossed design,which is good for dust proofing and humidity resisting of filament with high water absorption like PVAePAePA-CFePA-GFABSMAXTPU-95A.Hand pump saves your time and improve the efficiency.
• High CompatibilityeSUN vacuum bags are especially designed for 3D printing filament and is compatible for all 0.5KG/0.75KG/1KG filaments and 1.75mm/2.85mm/3mm filament.It can also used for food or other material storage.
• Recyclable & Sensitive Humidity IndicatorUnique recyclable and sensitive humidity indicator design. Easy to observe the humidity of filament while storaging in the vaccum bags.Indicator will show blue in high humidity and it can be reused after drying by oven or hot air(But may effect the sensitivity ).
• Safe & Environment-friendlyeSUN filament vaccum bags are BPA-free, which is totally safe and environment-friendly.eSUN vaccum bags is made of food grade PE+PA composite material,durable and recyclable.

Tags:workwarehouse

Title - Default Title