The gamepad wall stickers wall decals will give your room a refreshing look, create an enchanting happy atmosphere.
It can be applied to any smooth, clean and dry of walls, tiles, glass, furniture, etc., not suitable for a dirty or rough . NOT put it on a bumpy, dirty, wet , or the sticker will fall off.
It is easier to work with when the sticker is flat. So please use hard flat things to lay on it to flat. No tools needed. Use hand to secure into place.
You can play with unlimited creativity and freely DIY arrange the shapes and positions. You can use scissors to cut the patterns separately. When cutting, be careful not to break the patterns.
Installation Steps(Transfer film: transferring the wall sticker to the wall and can be reused)
1. Cut into pieces depend on the shape (also you can DIY)
2. Peel the paper part off the transfer film
3. Cover the sticky side of the transfer film on the wall decals. then scrape it again and again
4. Peel off the transfer film from the paper sheet and stick it on the wall, Scrape again
5. Remove the transfer film, as much as possible smooth and gently it out so no bubbles
Reminds:
1.If the is relatively smooth, best to dry the before paste, for easier to paste and flattening better.
2. For the larger pattern stickers, there may be a little bubble, then use a card to remove the bubbles or needle puncture the small bubbles, will not affect the overall paste effect.
3. If the wall is damp, aging or just painted, it may cause the wall to peel off. Use the hairdryer or volatilize for a while.
4. If the stickers are not pasted well on your wall, please use the hairdryer to blow it before you paste it.
5. If you accidentally put the wall sticker in the wrong position, gently pry off and re-paste it. The product can be reused, as long as it is not torn.
Tags:$20 - $35,Home & Garden,Home Decoration,Home Decorations,Home Décor,Household Hardware,Nursery Décor,Stickers,Wall Décor,Wallpaper & Decorative Stickers,Window Films,Window Hardware
Title - Default Title