Heyiarbeit 1500A 75mV DC Current Meter Shunt Resistor Resistance for DC Ammeter Shunt FL-19 1Pcs
100A Total Length: 55mm/2.17" Width: 20mm/0.79" Voltage Drop: 75mV Rated Current: 100A Product model: FL-19 The DC shunt resistor is made of copper and is plated with an anti-rust layer to ensure stability and durability. A meter shunt resistor needs to be placed parallel with the ammeter (Moving Coil Galvanometer), to bypass the current; Normally, the two outside terminals were connected with the power circuit directly, and both the inside terminals placed in series with the meter. 200A Total Length: 55mm/2.17" Width:20mm/0.79" Voltage Drop: 75mV Rated Current: 200A Product model: FL-19 The DC shunt resistor are two holes on both sides, which can be placed firmly, and there are nuts for circuit connection, good quality, good performance and easy installation. The shunt resistor is made based on the principle that a voltage is generated across the resistor when a DC current passes through the resistor. 300A Total Length: 65mm/2.56" Width: 25mm/0.98" Voltage Drop: 75mV Rated Current: 300A Product model: FL-19 The shunt resistor is made according to the principle that a voltage is generated across the resistor when a DC current passes through the resistor.A separate shunt, a resistor of very low but accurately known resistance, is placed in parallel with a voltmeter, so that all of the current to be measured will flow through the shunt. Read more 600A Total Length: 65mm/2.56" Width: 25mm/0.98" Voltage Drop: 75mV Rated Current: 600A Product model: FL-19 The shunt needs to be placed in parallel with the ammeter (moving coil ammeter) to bypass the current. The DC shunt resistor has two holes on both sides for a solid placing,and nuts for the circuit connection. 750A Total Length: 97mm/3.82" Width: 40mm/1.57" Voltage Drop: 75mV Rated Current: 750A Product model: FL-19 Normally, the two external terminals are directly connected to the power circuit, and the two internal terminals are connected in series with the meter.The current shunt resistor is made of Copper with Anti-Rust plated,ensures the performance of stability and durability. 1000A Total Length: 97mm/3.82" Width: 40mm/1.57" Voltage Drop: 75mV Rated Current: 1000A Product model: FL-19 The shunt resistor is used to expand the measuring current range of the instrument, and is used for current limiting and current sharing sampling detection in the circuits of meters, communication systems, electronic complete machines, and automatic control power supplies.An ammeter shunt allows the measurement of current values too large to be directly measured by a particular ammeter. Read more 100A 200A 300A 600A 750A 1000A Length 55mm/2.17" 55mm/2.17" 65mm/2.56" 65mm/2.56" 97mm/3.82" 97mm/3.82" Width 20mm/0.79" 20mm/0.79" 25mm/0.98" 25mm/0.98" 40mm/1.57" 40mm/1.57" Voltage Drop75mV ✓ ✓ ✓ ✓ ✓ ✓
Product Features
- Size- Total Length: 97mm/3.82"; Width: 50mm/1.97"; Voltage Drop: 75mV; Rated Current: 1500A; Product model: FL-19
- Material- The DC shunt resistor is made of copper and is plated with an anti-rust layer to ensure stability and durability
- Feature- The DC shunt resistor are two holes on both sides, which can be placed firmly, and there are nuts for circuit connection, good quality, good performance and easy installation
- Connection- The shunt resistor is made according to the principle that a voltage is generated across the resistor when a DC current passes through the resistor; The shunt needs to be placed in parallel with the ammeter (moving coil ammeter) to bypass the current; Normally, the two external terminals are directly connected to the power circuit, and the two internal terminals are connected in series with the meter
- Application- The shunt resistor is used to expand the measuring current range of the instrument, and is used for current limiting and current sharing sampling detection in the circuits of meters, communication systems, electronic complete machines, and automatic control power supplies
Tags:dingo
Title - Default Title