hygger Aquarium Filter, 3 in 1 Filter Media Container Box Adjustable Water Flow with Surface Skimmer Retractable Water Inlet Tube Turtle Betta Fish Tank Filter for 5-30 Gal
Read more TROUBLE SHOOTING： No water flow. --- Power off, Something in the rotor makes it cannot run. --- Check that the filter is plugged in Clean the rotor;Abnormal sound. --- Water inlet tube installed wrong, The water level is below the bracket. --- Reinstall the surface skimmer, Add water into the aquarium;Flow decrease. --- Water inlet tube installed wrong, Filter media is full. --- Reinstall the surface skimmer, Replace the filter media. PRODUCT PARAMETER Voltage AC:110-120V / 60 HzPower:12WQ.Max:158GPHSound:<40 dBCord length:5.9FTApplication:5-30 GalDimension:5.9"×4.33"×6.3" Read more PRODUCT DETAILS Small hole inlet filter tube. It is not easy to block and prevents small fish from being inhaled. Retractable water inlet tube. Adjust to the proper position according to the depth of the water and need. Suitable for different environments. Floating design, floating with the water level. The impurities are sucked into the whirlpool mouth, and the water surface is cleaner. Contains 3 kinds of filter materials, greatly enhance the filtering effect, and the material can be replaced with other filter materials. Note: Before use, take the filter materials out of the box, wash and soak them with clean water. Read more PRODUCT DETAILS Shockproof footpads. Reduce the noise generated by collisions. Freely adjust the amount of water flow. Easy to clean and maintain, just open the lid and take out the filter box.Recommended for cleaning the filter with tank water every 1-2 weeks. ✓ Please fill the filter chamber with water before using, the pump cannot work without water.✓Need to pay attention to the minimum water level, the water in the fish tank must exceed this limit. Read more Read more Connect the surface skimmer to the intake pipe and fix it tightly. Ensure the filter media is firmly placed in the filter housing. The first filter layer is the bio-sponge, the second is activated carbon and the last is bio-balls. Hang the installed filter on the aquarium, and rotate the adjustment knob so as to keep the hang-on filter parallel. Adjust the intake pipe to the correct distance. You need to manually fill the entire filter with water first.Power on and adjust the surface skimmer; the minimum water level must be higher than the surface skimmer when using then the surface skimmer, which will float on the water（If the surface skimmer doesn’t float, you must adjust the water level. Adjust the water flow appropriately.
Product Features
- WHAT IS IT: 1Fish tank filtration. Has a filter box, which can put a variety of filter materials, and the filter effect is stronger. 2Water circulation.Waterfall type, the water flow can be adjusted according to the needs of the fish tank. 3Aquarium oxygenation.Widen the water outlet, the outlet water is slow, and the amount of dissolved oxygen in the water can be increased. 4Can remove oil stains.
- PRINCIPLE OF FILTRATION: 1The turbid water at the bottom of the fish tank enters the long tube; 2Plus the surface scum removes surface oil stains; 3Dirty water passes through 3 in 1 filter media container; 4Filtered clean water flows out in a waterfall manner (water flow can be adjusted).
- MORE EFFECTIVE: There has a surface skimmer on the long tube. It can automatically telescopically float or rotate with the water level to remove oil stains on the surface and make the water clean.
- THREE-LAYER FILTER - REPLACEABLE: First floor: Bio-sponge.Cultivate nitrifying bacteria, filter out impurities and fish manure; Second floor: Activated carbon. Reduce aquarium odor;Third floor: Biological balls. Enhanced filtering.
- PRODUCT PARAMETER:Voltage AC:110-120V / 60 Hz; Power:12W; Q.Max:158GPH; Sound:<40 dB; Cord length:5.9FT; Application:5-30 Gal; Dimension:5.9"4.33"6.3".
Tags:paw07,sold
Title - Default Title