27W 9LED LED Work Light Square Flood Beam for 4X4 Truck Boat

Description:
1. Adjustable Trunnion mounting Bracket.
2. The suitable design for heating elimination.
3. Energy-efficient and low power consumption
4. The high performance of tight water-proof,dust-proof,quake-proof.

Specification:
Weight: 600g
Power: 27W
Voltage: 10-30V
Color Temperature: Pure White 6000K
Beam: Spot (30 Degree), Flood (60 Degree)
Working Temperature: -40~80 Degree
Life Span: 30000 hours
Lumens: Approx 2500LM
Waterproof Level: IP67
Housing Material: Die-casting Aluminium
Lens Material: PC
Housing Color: Black

Application:
1. Off Road Lighting Truck, Trailer Interior & Exterior Lighting
2. Construction Lighting Garden, Backyard Lighting Boat Lighting

Installing Tip:
1.Installation of LED lighting is reasonably straight forward and can be achieved by most people with a little bit of DIY skill.
However if you are unsure how to safely wire the unit up so no damage is done to the light and/or the vehicle,
we strongly suggest you seek assistance from a qualified a person.

2.It is imperative that a correctly sized relay is used to operate the light,
likewise it is imperative that a fuse is installed in the power circuit and that it is sized correctly in relation to the light being installed
taking into consideration the current draw of the light and any voltage drop that may occur due to the length of the cable run.

3.It is common practice to install a dash mounted or similar switch to turn the light on and off.
Some choose to also switch the relay with the high beams of the vehicle; however,
if the vehicle is being used on public roads it is imperative that there is also
the dash mounted or similar switch as noted above to enable the light to be switched off when on public roads.