D2000 Car Smart Digital OBD HUD Head Up Display

Why You Need?
HUD is short for Head Up Display. It displays driving data on the front windshield such as speed, water temperature, voltage, single driving distance, in order to avoid the danger caused by lowering head to watch the dashboard while driving. Drivers can read the driving information directly and instantly, and can always keep the best state on the way with HUD.

Main Features:
- Plug and play: automatically adapt to the vehicle type which is in line with OBD II or EUOBD port
- HD display: with multi-color design, makes the screen more abundant and easier to operate and read
- Rich contents: speed, water temperature, voltage, single driving distance/time, shift reminder, fuel consumption, fatigue driving reminders, over speed alarm, engine failure alarm, freely switch between kilometer and mile
- Built-in light sensor: the brightness can be adjusted automatically or manually to reach the best status which is in harmony with the environment
- Smart design: auto power on/off function, the HUD will start or turn off automatically with vehicle status, can effectively protect your vehicle's battery, also retain the manual switch mode, easier to control
- Handy size, easy to carry

Technical Parameters:
- Environment temperature: -40 - 80 Deg.C
- Atmospheric pressure: 86 - 106 kPa
- Relative humidity: 10 - 95pct
- Environmental noise: 60dB (A) and less
- Alarm sound level: 30dB (A) and more
- Working voltage: DC 9 - 16V (DC 12V/400mA)

Installation Notices:
- Know your vehicle brand. This product works for cars with OBD II agreement or EUOBD agreement. Open the engine hood and find the sticker below it. If it has the words like OBD II CERTIFIED, then it can be installed
- Find out the 16-pin diagnostic link of the vehicle and connect it well with OBD II line
- First time to use: start the engine, the HUD will show the voltage and scan the OBD II program; if it displays the fuel consumption, speed, RPM, it means successful installation; if after a few minutes, it shows the voltage only, please check the device, OBD cable and interface, then turn on again