2.4GHz LCD Display Night Vision Wireless Video Baby Monitor

Product Description:
Keep your communication with your baby safe and private, you could take care all of your kids with one monitor.
At the same time, a support will be enclosed free for your convenience to install the unit.

Main features:
Stable and reliable signal
2.4G wireless technology, over 250 frame skip, without WiFi interference
Unobstructed effective range
Covers a digital signal encryption transmission range of 98ft / 30m indoor, 656ft / 200m outdoor
2.4-inch LCD monitor
This video baby monitor is equipped with a 2.4-inch LCD screen for closer view on our babies
Long battery life
Built-in rechargeable Li-polymer up to 2 hours in receiver
Lullaby playing
Built-in lullabies, it may help the baby fall into a sweet sleep
Temperature detection
With temperature sensor, supervise baby's room temperature all the day, help to care your baby's health
2-way talkback
You could use the two-way talkback intercom function to comfort your babies
Automatic night vision
Allows you to care your babies in dark, keeping an eye on baby all night

Monitor:
LCD size: TFT 2.4 inch
Receiving sensitivity: -88dBm
Resolution: 960 x 240 pixel
Effective area: 49 x 38mm
Visual angle ( up / down / left / right ): 10 / 30 / 45 / 45 degree
Luminance: 250 cd / m3
Battery: 3.7V Li-polymer
Power supply: 5V DC
Dimensions ( L x W x H ): 11 x 2 x 7cm
Weight: 0.09kg

Camera:
Image Sensor: 1/3 inch COMS
Lens: 3.6mm ( EFL ), 2.8mm ( F )
Total Picture Pixels: 628 x 582 ( PAL ), 510 x 492 ( NTSC )
Visual angle: 62 degree ( PAL ), 46 degree ( NTSC )
Viewing angle ( Diagonal ): 70 degree
Minimum Illumination: 1.5 Lux / F1.5
Night Vision: 7pcs IR LED ( 5m )
Power Supply: 5V / 1A DC
Dimensions ( L x W x H ): 7.9 x 7.9 x 11cm
Weight: 0.08 kg

Using Methods:
Connect the mains socket to get start the baby unit, a light will display when working
Charging the parent unit fully before using, press and hold the power key at least 3 seconds to turn on it
Place the baby unit in a suitable place and adjust the viewing angle of the camera until you are satisfied with the image in the parent unit