小徐 zencart
DSO138 DIY Digital Oscilloscope Kit 12Bit SMD Soldered 13803K Version
Price:$52
Sprice:$34
name:RED
DSO138 DIY Digital Oscilloscope Kit 13803K Version Colorful TFT LCD Screen Display
Description:
DSO138 Oscilloscope Kit is specifically designed for electronic teaching and training. It adopts ARM Cortex-M3 processor and colorful TFT screen, and features with simplicity, reliability, moderate making difficulty, high making rate. People can carry out secondary development on the basis of the suite, for example, it can be changed into millivoltmeter, data loggers and so on.
Main Features:
● Adjustable vertical displacement and with instructions
● With automatic, regular and one-shot mode, easy to capture the instantaneous waveform
● Available rising or falling edge trigger
● Adjustable trigger level position and with instructions
● Can observe previous trigger waveform (negative delay)
● Can freeze at any time waveform display (HOLD function)
● Comes with 1Hz / 3.3V square wave test signal source
Suitable for: Arduino
Analog Bandwidth: 0-200KHz
Vertical Sensitivity: 10mV/Div – 5V/Div
Maximum Real Time Sampling Rate: 1 MSPS
Max. Input Voltage: 50Vpp (1:1 Probe); 400Vpp (10:1 Probe)
Input Impedance: 1 Megohm
Sampling Buffer Depth: 1024 Byte
Accuracy : 12Bit
Product Size(L x W x H): 13.00 x 8.50 x 3.00 cm / 5.12 x 3.35 x 1.18 inches
Package Size(L x W x H): 14.00 x 9.50 x 4.00 cm / 5.51 x 3.74 x 1.57 inches
We do not accept any responsibility or liability for misuse of this or any other product. All our products are extensively tested to comply with rigorous and strict QC standards. For certain products (e.g. toys, knives, etc.), we recommend proper supervision as we cannot be held liable for misuse or accidents.
Contents |
3 x Resistance (5 Percent Precision ) |
23 x Resistance (1 Percent Precision ) |
1 x Floor |
1 x Display |
|
18 x Tile Cell |
2 x Diode |
|
6 x Electrolytic Capacitor |
4 x Transistor |
|
5 x Key Switch |
1 x Crystal |
|
1 x 20Pin Double Row Male to Female Pin Header |
1 x 20Pin Double Row Male to Male Pin Header |
|
2 x 4Pin Male to Male Pin Header |
1 x 3Pin Male to Male Pin Header |
|
2 x 2Pin Male to Female Pin Header |
1 x Mini USB Interface |
|
1 x DC Power Interface |
1 x H-shaped Inductance |
|
1 x BNC Female Interface |
3 x Pull Switch |
|
1 x Light Emitting Diode |
4 x Plastic Column |
|
1 x Terminal Interface |
2 x Adjustable Capacitor |
|
1 x Shell |
1 x Oscilloscope Enclosure |
|
1 x English Manual |
Electrical & Tools,Consumer Electronics,Electrical Tools,Other Electrical Tools
pre products ------- next products
- 版权所有 © 2024 小徐 zencart视频教程. Powered by zencart 模板
如果有任何关于网站的意见,可以QQ联系或者发邮箱。