Infrared Sensor Precise Infrared Detector Prcatical Infrared Beam Sensor Single Beam Infrared Detector for Gate Opener System
Feature: 1. This infrared detector emits a switching signal through the built- in relay operation. When the emitted infrared beam is blocked, the relay will send a switching signal, and the signal can be set to normally open or normally closed. 2. Small volume, maximum detection distance up to 20 meters. 3. It has extensive applications, available for road gates, automatic door, mechanical operation safety protection, access control, security system and more 4. When installation, first install the receiver, and then install the transmitter. When they are in the same horizontal line, the OFF light in the receiver is OFF state, and then fix, the installation is completed after connecting the wires! 5. Installation height should be more than 20cm. Installation distance between the transmitter and the receiver should be no less than 2m. The infrared protection device should be placed vertically and on the same horizontal line. Specification: Item Type: Infrared Detector Detection Distance: 20 meters Operating Voltage: 12VDC Supply Current: >50mA Package List: 1 x Transmitter 1 x Receiver 1 x Screw Accessories Package 1 x English Manual
Product Features
- Scope of Applications:Our single photoelectric detector has extensive applications, available for road gates, automatic door, mechanical operation safety protection, access control, security system and more
- Signal Display:This infrared detector emits a switching signal through the built-in relay operation. When the emitted infrared beam is blocked, the relay will send a switching signal, and the signal can be set to normally open or normally closed
- Unique Desigh: High-power transmitter, 90% sensitivity margin, high-power infrared transmitter-receiver pair tube, low-power processing technology protection circuit design.High level of anti RFI/EMI capability and unique digital filter circuit design
- Installation Distance:Installation height should be more than 20cm. Installation distance between the transmitter and the receiver should be no less than 2m. The infrared protection device should be placed vertically and on the same horizontal line
- Installation Precautions:When installation, first install the receiver, and then install the transmitter. When they are in the same horizontal line, the OFF light in the receiver is OFF state, and then fix, the installation is completed after connecting the wires
Tags:dingo
Title - Default Title