Inkbird ITC-306T Reptile thermostats Vivarium Thermostat for Heat Mat Reptile Vivarium Decoration Tortoise Accessories Snake Vivarium Heat Bulb with Day Night Cycle Timer
Description
Inkbird temperature controller is a pre-wired heating thermostat with timing function, especially for the reptile breeding, incubation and cultivation.This heating thermostat can be set to two different temperatures with its dual function timing cycle for 24 hours after the day and night, which may better suited to the physiological needs of fish and aquarium plants.This thermostat has overheating protection and automatic temperature control all kinds of electrical equipment for greenhouse heater, heat mat.With dual LCD display, the temperature controller offers an optional display of Celsius or Fahrenheit, allowing humanized temperature control.The dual heating thermostat has Temperature calibration, the temperature may become more accurate controlled with its function of temperature calibration and temperature hysteresis. Plug & Play design, easy to use. Just plug the heater in sockets at the ITC-306, set your desired temperature is ok.Temperature range: -50~99 °C / -58~210 ° F. Maximum total output load: 2200 W (220 V).Input Power: 100 ~240VAC, 50Hz/60Hz. Temperature Control Output: Max. 10A, 100V ~240V AC Product parameters Relay Contact Capacity: Heating (10A, 100-240VAC)Temperature Resolution: 0.1 ° C / 0.1° FTemperature Accuracy: ±1°C (-50 ~ 70°C) / ±1°F (-50 ~ 160° F)Ambient Temperature: -30~ 75 ° C / -22~ 167 ° FSocket (UK Version): 140x51x27mm (5.5x2.0x1.0 inch)Storage Temperature: -20~ 60 ° C / -4~ 140 ° FStorage Humidity: 20~85% (No Condensate) Waterproof Metal probe The probe is waterproof made of food grade material. Waterproof level: IP68 Sensor Length: 2m / 6.56ft Widespread availability The day and night thermostat has variety of use, it is good for aquarium, incubation, greenhouse, reptile house, heat mat, terrarium, seed Germination, Rooting, keeping your various environments in their ideal temperature range. Read more There will be 2 situations when you use this reptile thermostat: 'PV' is the current temperature 'SV' is the setting temperature 'TS' is your target value 'DS' is the differential value 'CA' is the calibrated value 'CF' is the unit of temperature (C or F) 'TR' is time setting ( 0:off / 1:on ) 1.If you only need to control one temperature range the whole day: Your ideal temperature range: 22~25C, the settings as follow: TS1=25, DS1=3, CA=0, CF=C, TR=0 With this setting, when the PV actual temperature lower than TS1-DS1=25-3=22C, the work light will turn on and your heaters will start outputting until the temperature reaches 25C (TS1/SV), it will stop. 2.If you need to control different temperature range during day and night: Your ideal temperature range: during 8:00~18:00, keep the temperature within 22~25C, during 18:00~8:00, keep the temperature within 27~25C TS1=25, DS1=3, CA=0, CF=C, TR=1, TS2=27, DS2=2, TA=8, TB=18, TH=the hour of the current time when you set, TM= The minute of the current time when you set During (8:00~18:00) TA~TB, the thermostat will work with TS1 and DS1. During (18:00~8:00) TB~TA, the thermostat will work with TS2 and DS2 Dual Heating Version Heating & Cooling Version WIFI Heating & Cooling Version 12-stage Programmable Thermostat Dual Heating WiFi Version Heating ✓ ✓ ✓ ✓ ✓ Cooling ✓ ✓ ✓ WiFi ✓ ✓ TimeR Dual Time Cycle Setting 12-Stage Periods Timer 1-72 Hours Chitinous Heating Timer Temperature Measurement Range -50~99 °C / -58~210 °F -40~100°C /-40~212°F -40~100°C /-40~212°F -50~120°C /-58~248°F -40℃~100℃/-40℉~212℉ Temperature Accuracy ±1°C (-50 ~ 70°C) / ±1°F (-50 ~ 160° F) ±1°C (-50~70°C) / ±2°F (-58~160°F) 0.1℃/℉(<100℃/℉), 1℃/℉(>=100℃/℉) ±1°C (-50~70°C) / ±2°F (-58~160°F) 0.1℃/℉(<100℃/℉), 1℃/℉(>=100℃/℉) Probe Type 1Waterproof Stainless Steel Probe 1Waterproof Stainless Steel Probe 1Waterproof Stainless Steel Probe 1Waterproof Stainless Steel Probe 2Waterproof Plastic Probe
Features:
- Easy TO USEPlug-and-play design, easy to use, no wiring.
- DUAL HEATINGBoth relays are all for heating, NO cooling. Input Power: 100 ~240VAC, 50Hz/60Hz. Temperature Control Output: Max. 10A, 100V ~240V AC
- KEEP IDEAL TEMPERATURETemperature range: -50~99 C / -58~210 F. The reptile thermostat keep ideal temperature ranges for you all the time. With temperature calibration and temperature hysteresis can help the temperature more stable and accurate.
- 24 HOURS DAY & NIGHT CYCLE TIMERThis vivarium thermostat can be set to two different temperatures with its dual function timing cycle for 24 hours from the day and night, which is better suited to the physiological needs of reptiles.
- MULTI-FUNCTIONAL & SAFEDual display window, the Inkbird temperature controller can display measured temperature and set the temperature at the same time. It supports Centigrade or Fahrenheit and has temperature calibration and over-temperature and sensor fault alarm.
Tags:petsuk
Title - Default Title