KAIWEETS HT206D Digital Clamp Meter T-RMS 6000 Counts, Multimeter Voltage Tester Auto-ranging, Measures Current Voltage Temperature Capacitance Resistance Diodes Continuity Duty-Cycle (AC/DC Current)
HT208D HT206A HT206B HT206D HT208A KAIWEETS HT206D & Hard EVA Case Maximum Display 6000 Counts 4000 Counts 6000 Counts 6000 Counts 6000 Counts AC Voltage 600mV/6V60V/600V/750V 4V/40V/400V/600V 6V/60V/600V 6V/60V/600V 600mV/6V60V/600V/750V DC Voltage 600mV/6V/60V/600V/1000V 400mV/4V/40V/400V/600V 600mV/6V/60V/600V 600mV/6V/60V/600V 600mV/6V/60V/600V/1000V AC Current 60A/600A/1000A 4A/40A/400A/600A 6A/60A/600A 60A/600A 60A/600A/1000A DC Current 60A/600A/1000A 60A/600A Resistance 600Ω/6kΩ/60kΩ/600kΩ/ 6MΩ/60MΩ 400Ω/4kΩ/40kΩ/400kΩ/4MΩ/40MΩ 600Ω/6kΩ/60kΩ/600kΩ/6MΩ/60MΩ 600Ω/6kΩ/60kΩ/600kΩ/6MΩ/60MΩ 600Ω/6kΩ/60kΩ/600kΩ/ 6MΩ/60MΩ Capacitance 10nf/100nf/1000nf/10uf/ 100uf/1000uf/10mf/100mf 4nF/40nF/400nF/4uF/40uF/400uF/4mF 10nF/100nF/1mF/10mF/100mF/1mF/10mF/100mF 10nF/100nF/1mF/10mF/100mF/1mF/10mF/100mF 10nf/100nf/1000nf/10uf/ 100uf/1000uf/10mf/100mf Temperature/Frequency ✓ ✓ ✓ ✓ NCV ✓ ✓ ✓ ✓ Flashlight/Backlight ✓ ✓ ✓ ✓ ✓ To measure Direct Current Application in automobile repair, DIY, etc. Specifications: If current> 3A, the orange display lights up. The measuring range of DC current is 60A/600A. Accuracy: ±(2.5%+5). Note: Before measuring the DC current, long-press and hold the Z/F key until the ZERO character appears to clear the data. To measure Alternating Current Press the "Z/F" button to swith to AC Measurement Specifications: If current> 3A, the orange display lights up. The measuring range of AC current is 60A/600A. Accuracy: ±(2.5%+5). Note: To measure the current you need to clamp the meter around one of the wires and not the whole power cord. The power cord contains two wires carrying current and ground wire. The current in two wires always flows in opposite directions, so the magnetic fields from two wires canceling each other, therefore the meter reads 0 A. Grasp the individual current conductor to be measured and close the current clamp again. The measured conductor must be placed in the center of the clamp, otherwise, additional errors will occur. Jaw Design The Jaw is marked with maximum voltage and current measured value. Suitable for one-hand operation. Weight & Size Weight :260g. Size: 7.5 x 2.8 x1.3 inches. Small and light, easy to carry when working. Packing List 1 x Kaiweets Digital Clamp Meter 1 x Test Leads (Pair), 1 x Thermocouples(Pair), 2 x AAA batteries, 1 x User Manual, 1 x Carrying Bag Read more Z/F Button Measurement Press the "Z/F" button to switch the respective secondary function between the different measurements such as between AC and DC. Automatic Shutdown No operation in 15 minutes, the clamp meter beeps 3 times. Without further operation, it beeps again and switches off automatically. Multi-Function Accurately measure resistance, capacitance, diode, continuity. Easy to use in laboratory factories and homes. Read more
Product Features
- True-RMS clamp meter: This multimeter can accurately measure AC/DC Current, AC/DC Voltage, Frequency or Duty Cycle, Resistance, Capacitance and also provides Diode, Continuity and Temperature tests. True RMS for accurate measurements on non-linear loads. Easy to use for labs factories and household.
- LowZ & LPF: Low input impedance helps prevent false readings due to ghost voltage. Low Pass Filter (LPF) for accurate measurement of variable frequency drive signals when measuring motors and transformer. To measure the current you need to clamp the meter around one of the wires and not the whole power cord.
- NCV Detection Function: Non-contact voltage detection effectively check electrical status through measuring EM field intensity without touching any wires; The NCV button lies on the right side. Simply place your thumb on it and push.
- Multi-function: Two-color backlit LCD Display - When the voltage > 80V, the current > 3A, the LCD backlit screen turns red to warn you of high voltage/ LED Flashlight / Temperature Measurement for liquids and air conditioning ports included K-Type Thermocouple / Low Battery Indication / Auto power off after 15 minutes inactivity.
- Safety Service: Safety standard IEC 61010-1, CAT III 600V. Double insulation. 36 Months product service provided. 7/24 Customer Service.
Tags:dingo
Title - Default Title