Kidde Hardwire Carbon Monoxide Alarm with Digital Display and Peak Level Memory
The Kidde Smoke & Carbon Monoxide Detector, Hardwired Interconnect Combination Smoke & CO Alarm with Battery Backup & Voice Alert, model KN-COPE-IC, is an AC-wired, photoelectric alarm operates on a 120VAC power source with a 9V battery backup. Using photoelectric sensor technology, the wired smoke alarm detects smoke & fire. This fire alarm also includes the world's most accurate CO sensing technology based on claims by major manufacturers. A red LED will flash in unison with the voice alarm that warns of fire, carbon monoxide, & low battery. The Smart Hush feature silences the fire alarm for approximately 8 minutes. The green LED on the alarm will flash every 2 seconds when Smart Hush is activated and canceled. A maximum of 24 Kidde devices can be interconnected in a multiple station arrangement, but cannot exceed the NFPA (National Fire Protection Association) limit of 18 initiation devices, of which 12 can be smoke alarms. With 18 initiating devices (smoke, heat, CO, etc.), interconnected, it is still possible to interconnect 6 strobe lights and or relay modules. UL Certified with a 10-year limited warranty. Meets requirements of UL 2034, UL217, NFPA72, The State of California Fire Marshall, NFPA 101, FHA, & HUD. An essential device designed to protect you and your family from the dangers of carbon monoxide in your home, the Kidde KN-COP-IC carbon monoxide alarm can be installed on the surface of any wall or ceiling and hardwired into your home's electrical system. It also offers a digital display that shows the current carbon monoxide (CO) level at a glance as well as a battery backup. With an increasing number of state and local governments passing legislation requiring CO detectors in homes, it's never been a better time to safeguard your family against carbon monoxide exposure. The hardwired Kidde KN-COP-IC carbon monoxide alarm. Easily mounts to ceilings or walls, and it provides a digital display and battery backup. FeaturesThe AC wire-in Kidde KN-COP-IC carbon monoxide alarm offers multiple contractor-friendly features to ensure easy installation and minimal troubleshooting. It can be installed on any standard single gang electrical box (up to a 4-inch octagon junction box), and it features a snap-on electrical harness for quick installation and an adjustable mounting bracket for perfect alignment. The unit also includes a smart interconnect system with up to 24 Kidde devices, including smoke alarms. When interconnected, it can sound its carbon monoxide alarm pattern as well as sound a different alarm pattern when a Kidde smoke alarm is in alarm mode.It features three color LEDs for at-a-glance status updates. A green LED lights constantly when AC power is present, and it flashes every 7 seconds when in battery mode. An amber LED illuminates during a CO incident, while a red LED flashes in unison with the audible alert for both a smoke or CO incident. A digital display allows constant monitoring of carbon monoxide levels and updates every 15 seconds to let you know if levels change. The peak level memory feature displays the highest CO level measured since the last reset. A battery-backup system (powered by included 9-volt battery) provides continuous monitoring of carbon monoxide levels even during a power failure. It has a seven-year operating life and is backed by a five-year limited warranty.What's in the BoxOne Kidde KN-COP-IC hardwire carbon monoxide alarm, one 9-volt battery, one adjustable mounting bracket, and operating and installation instructions. See larger image. P.when('A').execute(function(A) { A.on('a:expander:toggle_description:toggle:collapse', function(data) { window.scroll(0, data.expander.$expander[0].offsetTop-100); }); }); From the Manufacturer The leading cause of accidental poisoning deaths in North America, Carbon Monoxide is odorless, tasteless and invisible. It is a silent killer. The Kidde KN-COP-IC Hardwire Carbon Monoxide Alarm with Battery Backup and Digital Display includes the most accurate sensing technology available, the patented Nighthawk electrochemical sensor. This Kidde hardwired alarm is an essential device designed to protect you and your family from the dangers of carbon monoxide in your home. The digital display feature allows constant monitoring of carbon monoxide levels and updates every 15 seconds to let you know if levels change. The peak level memory feature displays the highest CO level measured since the last reset. The 9V battery back up provides continuous monitoring of carbon monoxide levels even during a power failure. It includes a smart interconnectable system. This system enables the unit to alarm in a carbon monoxide pattern and sound a different pattern when interconnected to a Kidde smoke alarm that is in alarm mode. See more
Product Features
- Test/Reset - Tests CO alarm circuit operation and allows you to immediately silence the alarm
- Digital Display - Displays the level of carbon monoxide the unit is sensing. The unit updates this reading every 15 seconds
- Protects during a power failure - combo smoke and CO detector operates on a 120V power source with 9V front-loading battery backup
- Adjustable Mounting Bracket - Allows for fast installation and perfect alignment
- UL Certified, 10-year limited warranty
Tags:workwarehouse
Title - Default Title