Leak Detection Tools，Ultrasonic Leak Detector & Transmitter with Headphone Accessory Kit for Pipeline/tire/Refrigeration Equipment Leak Detection, Automotive Window Seal Inspection etc.
Ultrasonic Leak Detector & Transmitter with Headphone Accessory Kit Basic Introduction The leak detection tool adopts advanced ultrasonic sensor technology, which can detect and locate the sealing conditions or leak points of scenes such as automobile air conditioning compression system, water tank sealing space, automobile brake system and storage tank; according to the actual detection requirements, the leak detection The tool is equipped with 2 working modes (active mode and passive mode), and the sensitivity and response frequency of the detection tool can be adjusted. It is a quick, accurate and easy-to-use inspection tool. Working Principle When gas or air passes through a small hole, turbulence is generated, and the turbulence generates ultrasonic waves. Therefore, when air leaks into the vacuum easily or the pressure vessel leaks into the outside air, ultrasonic waves with strong directivity are generated. This directionality of ultrasonic waves can be used to detect leaks in the sealing system. The frequency of ultrasound is related to the size of the hole through which it passes, but the usual frequency is 40 kHz, so our detection tools can accurately detect leakage. Read more Applicable Scenarios Product Size The size of EM282-R is: 190x50x30 mm/7.5x2x1.2 inch; The size of EM282-T is: 100x60x25 mm/3.9x2.4x1 inch. Applicable Scenarios It can detect the sound insulation of automobile/truck windows, automobile air conditioning compression systems, wheels, leaks in water tank sealing spaces, automobile braking systems, bearing systems, bearings and lubrication; liquefied gas tankers, refrigerated vehicles, tankers, cargo Boxes, welding bead doors and other scenes. Read more Parameters 2 Working Modes The leak detection tool can use 2 working modes, active mode and passive mode. Among them, the active mode is mainly used to combine EM282-R and EM282-T when there is no ultrasonic wave that can be used for detection in areas where the leaking gas is not pressurized or pressurized sufficiently. Place the EM282-T ultrasonic transmitter in the sealed area and send ultrasonic waves. Scan the outside of the area with EM282-R. After detecting the ultrasonic waves from the sealed area, you can quickly and accurately detect and locate the leakage point; Passive mode can detect and locate leaks in pressure and vacuum systems. In this mode, only EM282-R is required. Package Information (No battery included) 1 x EM282-R Receiver 1 x EM282-T Transmitter 1 x Earphone 1 x English Instruction Manual 1 x Carrying bag Adjustable sensitivity and response frequency Adjustable sensitivity, frequency response: 40 kHz±2 kHz, adapt to various degrees of leakage, easy to detect and improve measurement accuracy. Read more
Product Features
- Located the leak location: Because the sound frequency of the leak port is different from other places, it quickly determine the leak port, suitable for all types of pressure or vacuum system gases.
- Check the degree of sealing: Adopt the advanced ultrasonic sensor technology to detect leaks of steam and liquid , detect the sealing degree of closed parts, such as cabins, car cockpits, refrigerators and containers.
- Two measurement methods: real-time detection that EM282-R detects leak port by the sound frequency; And non-real-time detection is that EM282-R capture the frequency signal from EM282-T. If there is gas in the pipe or tank, use real-time detection, or use non-real-time detection
- Adjustable sensitivity, frequency response: 40KHz2KHz, adapt to various degrees of leakage, easy to detect and improve measurement accuracy.
- Ultrasonic testing, fast and accurate, simple to use, green and environmentally friendly. With headphones, indicator lights, beginners can also quickly learn to use.
Tags:dingo
Title - Default Title