Network Cable Tester, 4 in 1 Wire Tracker PoE Tester with Ncv & Lamp for LAN CAT5 CAT6 Underground Telephone Line, Detect Voltage Measure Fault Distance, a Must-Tool for Home Repair, Cabling Engineers
Can use the main tester or the main tester and the remote test method to test the network cable, the open circuit, short circuit, crossover, reverse connection, paired connection and cable disconnection location of the call line, and the intuitive display on the LCD .Perform crosstalk test on the network cable to solve the potential failure of the slow network speed.You can find the desired target line among many network cables, telephone lines, coaxial cables and various other metal lines. Only the open circuit method can be used to measure the length of network cables and coaxial cables. The cable length can be measured up to 2000 meters, and the accuracy of measuring cable length and disconnection location can reach 98%.Can accurately determine that the open point is at a certain end (left, right or middle). No noise, no interference with load line hunting. The line can be found when the switch and router are powered on. The specific short-circuit location of the cable can be found. The voice prompt function of the remote adapter when measuring the line sequence.The host voltage is too low (≤4.5V) and the receiver (≤6V) has a low voltage prompt function. With storage, memory and recall functions, it is convenient for users to use and calibrate. Illumination lamp function, easy to work in dark environment.Language, system settings and backlight brightness adjustable function.The self-check function can automatically compensate for the influence of battery power changes and environmental temperature changes. The single-chip software watchdog design is reliable in operation. Test open, short, cross, split pairs.Cable types: Cat5e, Cat6, Cat6a, Cat7.(UTP & STP).Connect one end of cable to “CONT” port of tranmistter on the left side, the other end to the RJ45 port of remote, Press “OK” to start testing. Only if a cable exsits short circuit, no matter it exsits cross, breakage or not, the testing result will only display “Short” information. If it doesn't exsit short circuit, then it would display what actually it is. Measure length of lan cable, range is 2.5m~500m.Connect one end of cable to “Length/Port flash” port, disconnect the cable at far end, choose “Length” on the main menu, and select the preferred unit (meter/ yard/ feet ) before testing.Then press start to measure and the result will come out soon on the screen. Read more Analog/Digital/ PoE mode to locate lan cables.Connect the cable to be tested to “SCAN” port of tranmistter on the left side, enter “SCAN” on the main menu, press ok to choose scan mode you prefer, the default is digital mode, the other modes is Analog & PoE. Available for standard or non-standard PoE switch (5~60V), identify AT or AF standard of PSE type.Test the PoE information such as POE voltage, power supply polarity, power supply mode and the type of PSE(af or at standard). Hub blink for locating network port by the flashing port light on a server/switch/hub/router port. Another easy way to locate lan cable by eyes.The device can tell you the connected switch's information: Speed, Transmitting modes, Protocol . Read more Lighting function can solve the trouble of dark work. Read more Receiver can also be used as voltage detector.Accurate electricity measurement, Non-contact and safer to use. Read more What you get Emitter 1pc Receiver 1pc Remote 1pc User manual 1pc Earphone 1pc Cable adaptors 1 set Carry bag 1pc Quality certificate 1pc
Product Features
- 500m Test Range: The Rj45 cable tester measures the cable length and accurately locates the fault distance of the LAN cable, and the range is extended to 500m. This is longer than other testers and means it is equipped with the most powerful cable positioning technology for any work environment.
- Multi-function: Continuity testing, cable length measurement, cable faults testing, POE testing, hub blink and NCV funtion.
- POE Testing:identify which pins are providing power and detect how much voltage, identify which the type of PSE (at/af standard). Test CAT5e, CAT6, CAT6a (STP & UTP)
- NVC Induction Pen:NVC induction pen design, accurate electricity measurement, safter to use.
- LED Lighting and storage:Emitter and receiver all have lighting function. It can solve the trouble of dark work.With storage, memory and recall functions, it is convenient for users to use and calibrate.
- Continuity Testing:CONT-Test open, short, cross, etc for STP, UTP cable. Detect AC voltage presence (50V-1000V)
- Three Cable Scan Mode:Three scan modes selectable: Digital mode/ Analog mode/ PoE mode.
Tags:dingo
Title - Default Title