Network Cable Tester, VXSCAN Cat5 Cat6 Tester Wire Fault Finder for Locating The Breakage Point, Length Measurement, Continuity Checking with 8 Remote Units
WITH 8 REMOTE UNITS Included 8 far-end passive test jack. Operate at the same time to improve work efficiency. Package List (No Battery): 1NF-8108M Transmitter 8NF-8108M Remote unit Model Number : NF-8108M Wiremapping type : RJ45 Power : 1.5V x DC 4pcs(Package not included) NETWORK CABLE TEST FOR RJ45 Main Functions Check wiring error in 5E, 6E, such as open circuit, short circuit, jumper wire, reverse connection .Measure network cable length and determine the distance of broken point.8 remote identifiers enable users to test 8 cables at one time.Portable unit with long battery life (wait-case 50 hours).Memory function for calibration data.Self- checking and automatically compensate any change in battery capacity or ambient temperature.Automatically time-delay shut off. Read more VXSCAN Network Cable Tester——Wiremap Function If there is any short circuit the cable or terminal, the network cable tester will show you the number of the short circuit line. VXSCAN Network Cable Tester——Wiremap Function "R:"line"3" and"6"pins location display "x",this indicates an open circuit in far-end plug "3" and "6" pins, and that the open circuit is located nearby the far-end plug. VXSCAN Network Cable Tester——Wiremap Function "M:"The“3" pin location displays "X",which indicates an open circuit at the near-end plug-“3” pin,and that the open circuit is located close to the near-end plug. VXSCAN Network Cable Tester——Wiremap Function "｜" The“3" pin location displays “X”,which indicates an open circuit in the middle of the “3" pin cable. Short Circuit Open Circuit in far-end plug Open Circuit in at the near-end plug Open Circuit in the middle If pair and length measurement is conducted in normal conditions, it will display as shown. [Note]: Please do not connect remote units when testing length, and use a network cable with a length of 10m. If there is unpaired lines in the pair and length measurement, it will display the paired lines first.The last line-78 indicates there is no pair is in lines 7 and 8. It will display "X" to indicate an open circuit if the length is less than 90% of the other line pair length and the open circuit is located around 89.3m from the tester. Read more PROFESSIONAL NETWORK CABLE TESTER Cable Wire Fault Finder for RJ45 Cat5 Cat6 5e 6e Read more
Product Features
- Accurate Measurement The network cable tester can do the continuity test, help you check whether your cable is working normally. The network tester measures network cable length and determine the distance of broken point. [Note:Please do not connect to the remote end when measuring the network cable length]
- Long Battery Life & 8 Remotes The cat5 cat6 tester is a portable unit with long battery life (wait-case or standby mode for over 50 hours). The cat5 cat6 tester is equipped with 8 remotes, and each one has a number to help you clearly locate each line and save your time.
- Check Wiring Error in 5E/6E8108M network cable tester can check open circuit, short circuit, jumper wire, reverse connection .If there is an open circuit, cat5 cat6 tester will show the specific length range in which this situation occurs. Note that the far end cannot be connected when using pair and length measurement.
- Calibration DataThe cat5 cat6 tester can do self-checking and automatically compensate any change in battery capacity or ambient temperature. Dynamically calibrates cable length and make length measurement as accurate as 97%. Compact, lightweight, easy to carry and use.
- High QualityEfficient, powerful, convenient. You can complete network cable continuity check and cable sequence on your own. Network tester will indicate pair integrity of the cable. Internet wiring tester can auto time delay shut off.
Tags:dingo
Title - Default Title