Network Cable Tester, Wire Tracker, RJ45, RJ11, BNC, CAT5, CAT6, , LAN Cable Tester Metal Cable Wire Test Tool
Product Functions & Features: ·Automatically runs all tests and checks. ·Supports both Network and Telephone cable. ·Use for testing your homemade Ethernet patch cables to make sure they are in working order prior to connecting to your devices. ·Tests RJ45 cables, RJ11 telephone cables and network cables. Requires one 9-volt battery (Not connected in tester). ·Easy to read LED display indicates problems.Hand-held for portability. Connection diagram: The network cable and telephone line should be connected according to the indicated interface. Blue represents the test network cable: 2 connectors plugged in at the same time. Green stands for test phone line: 2 connectors plugged in at the same time. Line sequence connection standard diagram: In the specific application, there are two connection methods (line sequence)for RJ45 type plug and network cable, which are called T568A and T568B line sequence respectively. Use cable pliers to strip the outer sheath of the network cable You will see the following eight colors of metal wires. Straight-through cable: Both ends of the network cable are T568B standard T568B Straight-through cable: One end of the network cable is T568A standard ,the other end is T568B standard. Terminal equipment for connection: Computer to ADSL anchor; ADSL anchor to ADSL router; Computer to ADSL router; ADSL router to Concentrator or switch Terminal equipment for connection: Between computers, LAN switches, modems and telephones. Read more Battery installation steps： 1.Open the back cover of the battery the battery is aligned with the battery sheet (Small terminal corresponds to large terminal) 2.Push the battery firmly 9V battery copper wire connected to battery compartment self- adhesive fixed mute anti-collision 3.Put the battery in the battery slot and close the back cover The large battery compartment is easy to install or open, and the latch does not need any tools. Read more
Product Features
- 2 IN 1 LINE tester: Telephone and network wires,corresponding to interfaces RJ11 and RJ45, with more accurate detection results.
- THREE KEY SWITCH: OFF - turn off the tester; ON - fast detection, suitable for short distance line test / S-slow complete detection, suitable for long line test.
- SUITABLE FOR 4/6/8-PIN CONNECTOR: This network cable tester is designed for testing 4/6/8-pin connector. It is easy to use and helps to find the fault in the network cable.
- 8+1 GANG LED INDICATOR : Including common network and telephone lines for daily use, so as to find out the faults of connectors or lines faster.
- MINI SIZE: Mini tester, which can be easily mastered with one palm, can be put into your pocket and carried with you.
- FAST DETECTION OF LINE INTEGRITY: The network cable tester is a must-have tool for any network technician. It quickly and accurately detects line integrity, making it easy to identify and troubleshoot network issues.
- SNAP ON BATTERY COMPARTMENT: simply open or close the battery compartment and connect the batteries in the compartment. Disconnect the battery cable when not in use to prolong the battery life.
Tags:dingo
Title - Default Title