Patco 5067-53/CLR216 5067-53 Greenhouse Tape: 2" x 48 ft, Clear
Size:2 in. x 48 ft. (48mm x 48 ft.) Patco 5067-53 Greenhouse Tape is a clear polyethylene greenhouse repair patch tape designed for use outdoors for seaming and patching applications on greenhouse films. Also can be used for general-purpose sealing, splicing, seaming, surface protection and temporary hold down. Features of Patco 5067-53 include being UV and weather resistant, bonding aggressively to greenhouse films, and that it can withstand extended exposure to the elements. The tape comes on a release liner which provides ease of use on wide width applications. Made in the U.S. If not otherwise specified widths shown in dropdown are in inches. NOTES: Sizes shipped will typically be the tape industry standard metric-cut sizes, i.e. 24mm for each 1 inch of nominal tape width ordered (rolls are approximately 5% narrower than the nominal size). This product's actual size is 48mm x 48 ft. This tape is typically cut to width from log rolls so most sizes ship on non-branded plain white cores. As with any adhesive tape product it is always the user's responsibility to determine that the product is suitable for their intended use; e.g. if you want to remove a product cleanly from a specific type of substrate please test on an inconspicuous area first.Technical Information- Core: 3 inch diameter - Backing/Carrier: low density polyethylene (LDPE) film - Adhesive: acrylic - Release Liner: 53 coated Kraft paper - Thickness: 6 mils (carrier, adhesive) 5 mils (carrier) - Adhesion: 40 ounces per inch (to stainless steel test panel) - Tensile Strength: 11 pounds per inch (longitudinal) - Application Temperature: 50F to 120F - Service/Operating Temperature: -40F to 190F - Elongation: 400 %
Product Features
- Patco 5067-53 Greenhouse Tape is a UV stabilized clear polyethylene greenhouse repair patch tape. It is specially made for patching and seaming greenhouse films and is designed to be extremely durable for outdoor use.
- This greenhouse tape can also be used for general purpose splicing, seaming, sealing, temporary hold down and surface protection. Patco 5067-53 is resistant to ultraviolet rays and weather, it bonds strongly to greenhouse films and stands up to extended exposure to varying temperatures and the elements.
- The acrylic adhesive tape comes on a release liner that's easy to apply on wide width surfaces.
- Carrier/Backing: low-density polyethylene (LDPE) film. Adhesive: acrylic. Thickness: 6 mils (carrier, adhesive) 5 mils (carrier).
- Adhesion: 40 ounces per inch (to stainless steel test panel). Tensile Strength: 11 pounds per inch (longitudinal). Service/Operating Temperature: -40F to 190F. Application Temperature: 50F to 120F. Elongation: 400%.
Tags:ship02
Size - 2 in. x 48 ft. (48mm x 48 ft.)