Patco 580/WI236 580 Screen Printing & Graphics Protection Tape: 2" x 36 yd., White
Size:2 in. x 108 ft. (48mm x 108 ft.) | Color:White Patco 580 Screen Printing & Graphics Protection Tape is a polyethylene (PE) film that is coated on one side with an acrylic adhesive. Patco 580 is primarily used as a border tape for the screen printing industry. This specialized graphics protection tape blocks screens from moisture and chemicals during the screen printing process. Patco 580 will prevent ink from penetrating beyond the image area making for an easier and cleaner printing process. You can adhere Patco 580 Screen Printing and Graphics Protection Tape directly to screen mesh making it a good solution for block-out applications. This can be especially useful for multi- color printing and complex designs. Also, use Patco 580 to cover pinholes and registration marks. Made in the U.S. If not otherwise specified widths shown in dropdown are in inches. NOTES: Sizes shipped will typically be the tape industry standard metric-cut sizes, i.e. 24mm for each 1 inch of nominal tape width ordered (rolls are approximately 5% narrower than the nominal size). This product's actual size is 48mm x 108 ft. This tape is typically cut to width from log rolls so most sizes ship on non-branded plain white cores. As with any adhesive tape product it is always the user's responsibility to determine that the product is suitable for their intended use; e.g. if you want to remove a product cleanly from a specific type of substrate please test on an inconspicuous area first.Technical Information- Core: 3 inch diameter - Backing/Carrier: low-density polyethylene (LDPE) film - Adhesive: acrylic - Thickness: 5.5 mils (carrier, adhesive) 4.5 mils (carrier) - Adhesion: 50 ounces per inch (to stainless steel test panel) - Tensile Strength: 11 pounds per inch (longitudinal) - Application Temperature: 50F to 120F - Service/Operating Temperature: -40F to 190F - Elongation: 400 %
Product Features
- Patco 580 Screen Printing & Graphics Protection Tape is a polyethylene (PE) film that is coated on one side with an acrylic adhesive. Patco 580 is primarily used as a border tape for the screen printing industry. This specialized graphics protection tape blocks screens from moisture and chemicals during the screen printing process.
- Patco 580 will prevent ink from penetrating beyond the image area making for an easier and cleaner printing process.
- You can adhere Patco 580 Screen Printing and Graphics Protection Tape directly to screen mesh making it a good solution for block-out applications. This can be especially useful for multi-color printing and complex designs. Also, use Patco 580 to cover pinholes and registration marks.
- Features and benefits include an excellent solvent and chemical resistance, offers good adhesion, yet clean removal, tough and conformable backing, fiber-free, recyclable core, and long-term bonding strength.
- Carrier/Backing: low-density polyethylene (LDPE) film. Adhesive: acrylic. Thickness: 5.5 mils (carrier, adhesive) 4.5 mils (carrier). Adhesion: 50 ounces per inch (to stainless steel test panel). Tensile Strength: 11 pounds per inch (longitudinal). Service/Operating Temperature: -40F to 190F. Application Temperature: 50F to 120F. Elongation: 400%. Core: 3-inch diameter.
Tags:ship02
Color - White
Size - 2 in. x 108 ft. (48mm x 108 ft.)