PEI Magnetic Flexplate for Creality Ender 3, Ender 3 Pro, Ender 5, Ender 5 Pro, CR-20 3D Printer 9.25"X9.25" （235X235MM）
TECHNICAL SPECIFICATIONS:Bed Size: 235 x 235mm Build Volume: 220 x 220mm List of Parts: Magnetic Base Plate, Flexible Plate with PEI Printing Surface Material: PEI (Polyetherimide), Flexible Steel, Magnetic Ferrite Sheet Max Temperature (Magnet): ≤80°C Max Temperature (PEI): ≤200°C Color: Beige / Dark Grey / Steel Silver Adhesive Backing: 3M 300LSE Adhesive Backing3D Printer Compatibility: Creality Ender 3 , Ender 3 Pro, Ender 5, Ender 5 Pro, CR-20, Ender 3 Pro Silent, Ender 5 Silent, TwoTrees Saphire Pro, Tevo Tarantula Pro, Tevo Flash, Geeetech A10, BIQU B1, ELegoo Neptune 2, Voxelab Aquila, Artillery Genius, Robo R1+ TYPICAL APPLICATIONS: Because the CMagnet FlexPlate uses magnetism to keep the FlexPlate on the Base, it’s critical that you never exceed 80°C for your bed temperature, as this will demagnetize the composites. Try to remember the right orientations of these two parts when you receive them, as the magnetic polarization will offer greater strength if the magnetism is aligned between the parts. If you are confused with this at all, put the FlexPlate on the Base and turn it 90° at a time to find the strongest magnetic attraction, and this will let you know that both parts are magnetically polarized in the right orientation. To clean your PEI Sheets effectively without damaging them, use isopropyl alcohol with a clean cloth to rub off any remaining plastic as well as any oils that may have come from your hands. This will keep it in the best possible condition for continuous printing, without negatively affecting any of your future prints on those same sheets.
Product Features
- These 235x235mm PEI Sheets with 3M Tape pre-applied, which help to improve first-layer adhesion and make it far easier to achieve great 3D Printing results
- PEI Sheets are made of Polyetherimide, a plastic polymer with impressive abrasive qualities, which is a very unique material that offers effective stickiness while maintaining high durability and hardness
- This build plate is designed to the exact same standards as the Creality CMagnet BuildTak FlexPlate, but has been equipped with PEI instead of BuildTak, allowing you to swap out your BuildTak plate with the PEI plate at will by simply taking one off and magnetically sticking the other directly on top
- This PEI build surface not only offers great adhesive characteristics, but also keeps the original shape without stretching or breaking from minor to moderate forces
- This is a far easier method than ABS Juice, Kapton Tape and other Adhesion Aids, as it can be easily maintained and cleaned with isopropyl alcohol, and is capable of lasting a long time without needing any kinds of replacements or repairs
Tags:workwarehouse
Title - Default Title