PrimoChill SysPrep - Cooling Loop Pre-Treatment
SysPrep Install: Step One Empty bottle of SysPrep into 1 US Gallon of fresh DI or Distilled water, and shake for 30 seconds. Add mix to cooling loop. SysPrep Install: Step Two Fill loop with treated water and be sure to remove as many air bubbles as possible. Start loop pump and begin circulating the treated water. Run treated water for at least 12 to 24 hours to ensure loop is properly flushed and treated. While using for longer periods of time doesn't have negative effects, Sysprep is not an effective final coolant and should be replaced with coolant before any extended use of computer. SysPrep Install: Step Three Drain System. Inspect drained water for debris or foreign particles. Dispose of drained water. Repeat flush if needed. Residual treated water left in your loop is not harmful. If you prefer to remove it, do a simple rinse of the loop with fresh DI or Distilled Water. This rinse will not affect the results of the Sys Prep just performed. SysPrep Install: Step Four Fill loop with your choice of coolant and begin water- cooling. Sys Prep System Reboot Rad Clean Rad Clean Kit Liquid Utopia Primo Prep New Build Cleaner ✓ ✓ ✓ ✓ Existing Build Kit ✓ ✓ ✓ ✓ ✓ Additional Hardware Included ✓ Fluid Protectant ✓ ✓ WARNINGS Do not mix with any pre- mixed coolants as it will over saturate the inhibitors.Not responsible for any hardware damage. Use at your own risk.Not compatible with aluminum water cooling components.
Product Features
- Water Based
- Pre-Mixed. Just Add to a Gallon of Water
- Safe on All Plastics, Rubbers, and Miscellaneous Gasket Materials, Including Acrylic.
- Not compatible with aluminum water cooling components.
Tags:cocoon
Title - Default Title