SMAKN LCD Indicator Battery capacity Tester for Li6: 6 pcs lithium batteries Cell-GREEN
The temperature range of use: - 20 to 50 ℃; In charge back, LCD monitor for 2 core input connector interface (anode) is red through power master switch connection Battery anode, black connect the battery negative; Attached (red and black wire) row 2 core plug wire welding on using the device's battery, connect the positive note red, black Connect the cathode; The other side of the insert row 2 core wire inserted into the LCD power indicator 2 core socket, socket has direction, notice shall not be forced Insert; As the battery monitor electricity works, backlit display lights; Pay special attention to after electric power monitor cannot touch using equipment parts, metal parts should not reach the LCD panel And each component on the display. LCD screen surface with a layer of protective film, fixed before the installation, should be torn off, lest affect the contrast and liquid crystal display (LCD) Beautiful; The display panel from right to left seven shows, from low to high respectively from the battery capacity; At the same time on the right The percentage of the corresponding numerical; After When the voltage is less than the lowest percentage showed 0%, backlit closed at the same time, the state of node; In use process, the light of the battery and overloading cases, power state of the display instructions may not be consistent, should use The current standard discharge rate shall prevail. If it is thought that the battery monitor cannot correct instructions of the battery, please choose me Department of real power monitor. The nominal voltage greater than 60 v applications, such as battery monitor electricity
Product Features
- The under voltage value: according to the battery discharge curve
- Input current:5-10mA;Maximum allowable power consumption: 1.0 W;
- Input power consumption:200-700mW
- Dimension: 64*25mm
- Saving electricity current (backlit out) : < 200 mu;
Tags:industrial2
Title - Default Title