SSK Aluminum M.2 NVME SSD Enclosure Adapter, USB 3.1/3.2 Gen 2 (10 Gbps) to NVME PCI-E M-Key Solid State Drive External Enclosure Support UASP Trim (Fits only NVMe PCIe 2242/2260/2280)
Read more According to the New USB-IF standard, the USB 3.2 specification replaces the USB3.0 USB3.1 specification and it introduced a new nomenclature, the USB 3.2 specification absorbed all prior USB 3.0/3.1 specifications, So, our 10Gbps USB C NVME SSD Enclosure, we can say USB3.1 Gen 2 or USB3.2 Gen 2(Old Nomenclature /New Nomenclature) USB 3.2 New Nomenclature: 1. USB3.2 Gen 1 = USB3.1 Gen 1 , Product transfer rate is up to 5Gbps, Marketing name: SuperSpeed USB 2. USB3.2 Gen 2 = USB3.1 Gen 2 , Product transfer rate is up to 10Gbps, Marketing name: SuperSpeed USB 10Gbps 3. USB3.2 Gen 2X2, Product transfer rate is up to 20Gbps, Marketing name: SuperSpeed USB 20Gbps Package Included： 1 x M.2 NVME to USB 3.1/3.2 Type-C SSD Enclosure 1 x USB C to USB C Gen2 Cable (10Gbps) 1 x USB A to USB C Cable (10Gbps) 1 x Thermal Conductive Pad 1 x Screw Set : 4 screws (2Scew A and 2Screw B) and 2 washers, extra screws in case of losing them; 1 x Screw Driver Notice： Both cables up to 10Gbps transfer speed. The actual speed depends on the speed of your SSD, USB Port type, your computer performance etc, nvme ssd is not included. SSK Type C M.2 NVMe PCIE SSD Enclosure SSK M.2 NVME SSD Enclosure adopts high performance controller chip(JMS583), up to 10Gbps high-speed data transmission. 1GB file only takes1 second ; Complies with UASP, Trim which can effectively improve the speed and extend the lifetime of SSD. It supports PCI-E based M key & (M+B) key M.2 NVME SSD up to 4TB; SATA-based B Key & (B+M) Key M.2 SSD or PCIe AHCI SSD or MacBook original SSD are not supported! If need SATA Based SSD Enclosure, pls buy another model HE-C320 from our Store. Interface type: M.2 NVME PCIe to USB 3.1/3.2 Gen 2 Support SSD Drivers Size: 2242, 2260, 2280mm Case Size: 1153911mm Cable 1 : USB C to USB C(150MM) Cable 2 : USB3.0 AM to USB C(150MM) Color: Grey+Black Read more Main Features Fashion Design Adopts aluminum alloy shell, Slim design, durable and excellent heat dissipation, be portable and easy to carry. Extreme Data Transfer With USB 3.1 Gen2 interface,provides transfer speeds of up to 1000MB/s,1GB file1 second. Backward compatible with USB 3.1/3.2 Gen2 and USB 3.1 up to 10Gbps. SSD needs to be fully inserted for working If there is a fatal errors or SSD can not be recognized: First, Please confirm your SSD is M.2 PCIE NVME SSD. Second, please confirm whether your SSD is fully inserted into the NVME Slot. If not, you need to push the SSD into the PCIE NVME Slot at a 45 degree angle.The pins of the SSD will be fully seated and covered. Read more Main Features Easy Installation With screw driver, no additional tools required. With two cables, USB A to C and USB C to C which suitable for all Host PC ports. Supports Plug & Play and Hot-Swapping. Copper Strip + Thermal Conductive Pad for Excellent Heat Dissipation SSK Enclosure not only adopts the larger copper strip for heat dissipation, but also have a special design, it adds a plastic shrapnel which can lift SSD slightly. With the thermal pad, the lifted SSD can be tightly attached to the Aluminium shell, so as to achieve the purpose of rapid heat dissipation. Multi OS Compatible Windows 7 or above, Mac OS 10.10.5 or above, Linux, and Type C Android Phones. Read more Installation Instructions Attention: 1. It requires 2 screws and 1 washer to assemble the enclosure. When install the round washer to assemble SSD and PCB, please pay attention to the thickness of the washer, it has two directions, please keep upper thin and bottom thick. When insert the pcb to house casing, as it is shrapnel design, pls press down the PCB slightly to ensure the proper insertion. 2.After installed, when the first time to use the new SSD, it may not be found, please partition and format it first under disk management, then it can be used normally. If want to work on both Mac and Windows OS, please format it to EXFAT. 3. Pls kindly noted our enclosure adopt the chipset is JMS583, NOT JMS562. It works well on all brands NVME M.2 2242, 2260, 2280mm SSD including Intel 600p, 660p, Sumsung, WD, Crucial etc. full range up to 4TB. 4. Due to the transmission speed is extreme fast for nvme ssd, the temperature is relatively higher than USB3.0 HDD, but beause of our unique product design, the whole SSD case can be worked as the thermal pad, it can repidly dissipate the heat and protect the SSD. Generally the highest of our product temperature will be around 50 °C, rather than like other products even without the thermal pad and temperature can reach to 70 °C. If any question you have, please free to mail us, we promise that we will reply within 8 hours and give you a happy solution. Thank you for your attention! M.2 NVME SSD Enclosure M.2 SATA SSD Enclosure External Mini Portable SSD (1TB) M.2 Tool- Free NVME SSD Enclosure Aluminum 2.5-inch USB C to SATA External Hard Drive Enclosure Aluminum USB 3.0 to SATA Docking Station(One bay) Compatibility M.2 NVMe M Key & (M+B) Key 2280/2260/2242 SSD M.2 SATA B Key & (B+M) Key 2280/2260/2242 SSD Compatible with PC & Mac computers & smartphone M.2 NVMe M Key & (M+B) Key 2280/2260/2242 SSD Compatible with 2.5 inch SATA HDD and SSD Compatible with all 2.5 inch and 3.5 inch SATA HDD and SSD USB Interface USB 3.1 Gen 2 USB 3.1 Gen 1 USB3.1 GEN1 USB 3.1 Gen 2 USB 3.0 Type B USB 3.0 Transmission Speed 10Gbps 5Gbps 5Gbps 10Gbps 5Gbps 5Gbps Material Aluminum Aluminum Aluminum+ABS Aluminum Aluminum+ABS ABS Max HDD Capacity 4TB 2TB 1TB 4TB 4TB 16TB
Product Features
- Applicable SSD - This M.2 SSD Enclosure only for NVMe M-Key M.2 SSD (PCIE-based). Applicable to sizes 2242 / 2260 / 2280 solid state drivers. Does not support M.2 SATA based SSDs, M.2 PCIe AHCI SSDs, M.2 PCIe devices such as WiFi and capture cards, mSATA SSDs, and non-M.2 form factor SSDs.
- Type C interface- Both side can be inserted; USB-C Gen 2 10Gbps or Thunderbolt 3 are recommended for extreme speed performance. One HD movie transfer only takes 2 seconds; Backward compatible with USB 3.1 Gen1 and USB 3.0 up to 5Gbps.
- Aluminum Alloy Shell- Adopts aluminum alloy shell, slim design, durable and excellent heat dissipation, be portable and easy to carry;
- Blue Indicator- Blue Indicator shows the data transfer status, easy and clear;
- High Quality Master Chip- Adopts high performance controller IC, Complies with UASP, Trim which can effectively improve the speed and exteend the lifetime of SSD. Compatible Multi OS, Windows 7/ 8/ 8.1/ 10/ Linux/ MAC.
Tags:electronics2022
Title - Default Title