Note:
The solution should not over the immersion level.
Please clean the electrode after using,turn off and replace the protective cap.
Features:
Being factory calibrated,measuring your water quality within seconds.
Widely apply to test water quality,for RO system, aquariums, hydroponics, pools, spas,etc.
Button Function:
Hold Function: Saves measurements for convenient reading and recording.
TEMP Function: The meter has automatic temperature compensation function.
ON/OFF: on and off.(Tester will automatically shut off to save battery power without pressing any key within 10 mins.)
Specifications :
Model: TDS-3
Button: with 3-HOLD, TEMP, ON/OFF
Overall Size : 156 x 29 x 24 mm / 6.14 x 1.14 x 0.94 inch (L*W*H)
LCD Display Screen Size: 19 x 8 mm / 0.75 x 0.31 inch (L*W)
Pin Diameter: 1.6mm
Backlight: NO
Range :0-9990 ppm
(Dual Range:measures from 0-999 ppm,with resolution of 1 ppm;from 1000-9990 ppm,resolution is 10 ppm,indicated value x 10.)
Accuracy : +/-2%
Degrees Celsuis:0-50C
Automatically Shut Off: Yes
Color : Yellow
Package Content :
1 x TDS Tester
Each meter included:
2 x 1.5V Button Cell battery (included)
1 x User Manual
Tags:$0 - $20,Conductivity Meters,Conductivity Meters & Accessories,Industrial,Lab & Scientific,Lab & Scientific Products,Measure & Inspect,Others,Test,Water Quality & Instrumentation
Title - Default Title