Tiergrade Superspeed 7 Ports PCI-E to USB 3.0 Expansion Card with 15-Pin SATA Power Connector - PCI Express(PCIe) Expansion Card USB Card for Desktop PC Support Windows 10/8.1/8/7/XP
Read more Features High Speeds Get your time back. Impressive USB 3.0 performance means no more waiting for data to transfer. Stable Power Supply Realizing fast and interference-free data and power transmissions via a SATA power connection. Operating Systems Windows 10 / 8 / 7 / XP / Vista, etc. Backwards compatible with USB 2.0 and 1x devices. Read more PC's upgradability Here’s a cost-effective solution for adding USB 3.0 connectivity to your computer. When multiple devices are connected, traditional single bus USB 3.0 cards share your maximum bandwidth between all ports. Note: Each port of the PCI-E card delivers 5W(5V/1A) power max. Devices, which require more than 5W power, may not be compatible with this USB expansion card. Package content 1x USB 3.0 PCI-E expansion card1x 15-Pin to 2x15-pin SATA power cable1x CD driver1x installation screws1x user manual Tips for installation Concerning the included SATA power cable, it has two female ends, one end is for the PCIe usb 3.0 card, and the other ends, this for your devices (such as hard drive). Note: 1. Please connect the SATA power cable tightly. 2. Use the 15-Pin SATA power cable, not the 4-pin SATA power cable. 3. If you have enough 15-Pin SATA power cable for your device another end is not required, you can just use one end for the usb PCIe card, and then plug in the SATA connector to the power supply. Easy Installation Step 1: Shut down the PC, unplug the power supply and remove the PC case. Step 2: Connect the included SATA power cable in the correct direction. Step 3: Find the corresponding PCI-E interface, push the card down and tighten the screws. Step 4: Close the PC case cover, plug in the power supply, turn on the PC and install the driver, then restart the PC. Read more Warm Note: ● We do not provide technical support for Linux, Mac, and Oculus sensors ● Not support PCI slot, only work with PCI Express x1 slot and versions above. ● The actual transmission speed of the PCIe USB 3.0 card may be limited by the connected device. ● Install the driver after the PC recognizes the USB expansion card, otherwise, the installed driver will be invalid. ● If the SATA power cable or the PCIe card is not connected properly, your PC may not automatically recognize the PCIe card. ● It is not recommended to connect the supplied SATA 15 pin cable to an external power source, it may cause a short circuit in the PC. ● The included driver CD is only available for Windows 7. If you need any help while installing the driver, please contact our after-sales service. Read more Attention: Tiergrade PCI Express Expansion Card allows you to add seven SuperSpeed USB 3.0 ports to your PC to achieve maximum productivity. This card provides easier access to commonly-used peripherals and features two internal USB ports that let you connect devices inside your computer case securely. Specifications: Chipset: VIA VL805 + VL813 Version: PCI Express 2.0 Data transfer rate: Up to 5Gbps USB power output: Up to 900mA System Requirements: 1. Plug and Play on Windows 10 / 8.1 / 8 (32/64bit) system. 2. Need to install the driver on Windows XP / Vista / 7 (32/64bit) system. 3. SATA power connection is required. You Must Know: 1. Do NOT install this PCI-E card when the computer is on. 2. We suggest that you use wired equipment to prevent signal interference. 3. Please find the part number at the edge of the card when registering the PCI-E card. 4. To ensure the PCI-E card works properly, please connect it to your PC's power supply first. 5. If your power supply has enough 15-Pin SATA power cables, it is recommended to use your own instead of the included SATA cable. 6. It is recommended that you uncheck the option of "Allow the computer to turn off this device to save power" in the "Device Manager" of your PC when using the expansion card (perform the same operation for each "USB ROOT HUB"). 7. The PCIe USB 3.0 card may not be compatible with some USB 3.0 computer host controllers, and here are two requirements of the host controllers: The host baffle has reserved ports; The host controllers' width> 4.73 inches.
Product Features
- Big Expansion: Provides seven external USB 3.0 ports for any PCI Express-enabled computer system for connecting additional external hard drives, CD/DVD drives, printers, scanners, webcams, game controllers, digital cameras, etc. to a computer system.
- SuperSpeed USB 3.0: Give you fast access to your files with data transfer rates up to 5 Gbps, at least 5 times faster than USB 2.0. Lightning fast to transfer HD movies, photos, music and more. Note: The actual transmission speed may be limited by the connected device.
- Good Compatibility: Support Windows 10 / 8 / 7 / Vista / XP (32/64-bit) and more operating system; Backwards compatible with USB 2.0 / 1x devices; Comply with PCI Express x1 slot and versions above.
- Stable Power Supply: Equipped with a power management chip plus 15-Pin SATA power cable, which supplies 5V/2.4A power. Each port of the PCI-E card delivers 5W(5V/1A) power max. Devices, which require more than 5W power, may not be compatible with this USB expansion card. Note: It is mandatory to connect the card to the power supply of the PC.
- What You Get: 1x USB 3.0 PCI-E expansion card, 1x 15-Pin to 2x15-pin SATA power cable, 1x CD driver, 1x installation screws and 1x user manual.
Tags:cocoon
Title - Default Title