T.R.U. AF-20R Heat Shield Resistant Aluminum Foil Tape: 3 in. Wide x 50 yds. (2Mil)
Size:3" in. x 50 yds. Aluminum Foil Tape with LinerT.R.U. AF-20R Aluminum Foil Tape is a 2 Mil dead soft premium grade Aluminum Foil coated with an extremely aggressive synthetic rubber adhesive that provides a tight positive grab when smoothed on work surfaces; its malleable foil conforms well to irregular and curved surfaces. The T.R.U. AF-20R Aluminum foil tape is an all-weather general purpose used in fiberglass duct board systems (on seams and joints to maintain the integrity of the vapor barrier) and on FSK systems.ApplicationsFor heat reflection and dissipation - Masking in paint stripping and electroplating - Cover over and seal seams in Hexayurt shelters - Waterproof sealing - Sealing plastic and automation plateware (in biotech research).Properties• Adhesive: Synthetic Rubber• Thickness: 3.6 mils (carrier[2.0] + adhesive[1.6])• Release Liner: Paper• Adhesion: 91 oz/in (to stainless steel test panel)• Tensile Strength: 17.1 lbs/in.• Elongation: 3.5%• Temperature Resistance: -4 F to 176 F• Core: 3 inch diameterAlternative to Ideal 488; Polyken 337; Venture 3530; Shurtape AF973; Fasson 0802; Tesa 53900.Note: Sizes will be the tape industry standard metric sizes, ex. 12mm for every 1/2 inch of nominal value tape width (Rolls are give or take 5% wider or narrower than the nominal size).
Product Features
- 3.6 Mil Aluminum Foil: 1.6 mils (adhesive) + 2 mils (carrier) - 3 in. Core
- Resist water vapor, some chemicals, flame, moisture, weather and smoke transmission.
- Acts as a vapor barrier to insure the integrity of the insulation system
- Thermal conductivity helps cooling and heating efficiency, improving efficiency in systems
- Conformable backing and pressure sensitive rubber adhesive adheres to a variety of smooth or irregular surfaces
Tags:ship02
Size - 3" in. x 50 yds.