Type-C USB-C PD 2.0 3.0 to DC Decoy Fast Charge Trigger Poll Detector High Power 120W for Notebook Powered Change Type-C, ZYPDE Model Trigger Poll Detector Contains Any Function of ZY12PDN Model.
Instructions for use: 1. In manual mode,press the button to switch gears. The seven-color lights are on to represent 1-7 gears. In PPS continuous adjustable mode,long press can increase or decrease the voltage.In automatic mode,the corresponding gear is automatically triggered. 2. If the PD is not triggered or the timeout is not responded,the cyan light will flash to report an error. In the automatic mode,if there is no corresponding gear,it will trigger 5V by default. The custom mysterious function requires the charger to support at least 5-11VPPS gear. If it does not support,the red light will flash to report an error. 3. Press and hold the button and then plug it in. After the colorful lights flash red,green and blue,release the button to enter the default mode setting. Color function: Red:Default:5V voltage; Short press the button:cycle from low to high; Long press the button:Long press the PPS gear to enter step voltage regulation. Yellow:9V. Green:12V. Cyan:15V. Blue:20V. Purple:The highest grade of PD2.0. White:5V+Xiao-mi; short press:cycle from low to high; long press:long press on PPS gear to enter step voltage regulation. Red flash:Polling from low to high. Yellow flash:low high low high polling. Green flash:from low to high, stop at the highest gear; short press:cycle from low to high; long press:long press on PPS gear to enter step-by-step voltage regulation. Cyan flash:the last group of PPS highest voltage; short press:change the rise and fall; long press:long press the PPS gear to enter the step voltage regulation. Blue flash:the last group of PPS+Xiao-mi; short press:change the rise and fall; long press:long press the PPS gear to enter the step-by-step voltage regulation. Purple Flash:Customize the mysterious function. White Flash:Customized mysterious function + Xiao-mi. After setting,long press the button to save the default light off and exit.
Product Features
- This product can trigger any voltage within the 3-21V current 6A of the PD3.0 and PD2.0 specifications, and the maximum power is 120W. After triggering, the user can supply the back-end load test and use through the USB socket or the self-soldering cable.
- PD trigger adopts hardware protocol IC, which has better compatibility. The version with USB uses a high-current pure copper socket with low internal resistance.
- TID certified high-durability and high-current C port, TVS anti-short circuit and anti-reverse connection, Japan ALPS long-life tact switch. With USB welding position and 5.08 screw terminal welding position, it is convenient to make Type-C to DC adapter cable.
- The size is 28mm*15mm, after welding the DC wire heat shrink tube, you can use the PD mobile power supply to charge your notebook.
- The ultra-low self-consumption 1-2mA is 4 times smaller than the previous generation ZY12PDN-8mA. Good safety and stability, C port with reverse polarity protection. Package Included:2 x ZYPDE Decoy fast charge trigger detector.
Tags:dingo
Title - Default Title