uxcell Electronic Vibration Sensor SW-420 Shake Switch 12V 10mA Curved Pin 10Pcs
Description:1.SW-420 is a single roller type omnidirectional induction trigger switch. This product can sense vibration and tilt in different directions.2.This product is completely sealed and can be waterproof and dustproof. Suitable for tilting and vibration induction triggering of small current circuits.3.When there is no vibration or tilt, the product is in the closed ON/OFF state and is in a stable state. When there is vibration or tilt, the conductive resistance increases or decreases, and a current pulse signal is generated, thereby triggering the circuit.4.The vibration sensor is a vibration sensing element developed for alarms. Because it simplifies the complicated structure of buzzer and magnet plus spring used in traditional alarms, it has been widely used in electric alarms in recent years. Working Principle:Normally, the switch of any angle is in the on state. When it is vibrated or moved, the roller that conducts current in the switch will move or vibrate, which will cause the passed current to be disconnected, or the resistance value is increased to trigger the circuit.The characteristic of this kind of switch is that it is normally in the on state and will be disconnected briefly when it is vibrating, so it has high sensitivity. Through the setting of the IC, the customer can adjust according to the sensitivity requirement of the product.Specification:Product Name: Vibration SwitchModel Number: SW-420Max.Voltage: 12VRated Thermal Current: 20mAInsulation Resistance: 10M ohmMax.Temperature Resisting: 80℃Pin Size: 15mm x 0.6mm(LD)Body Dimension: 10mm x 5.5mm(LD) Package Content:10 x Vibration Switch
Product Features
- Model Number: SW-420; Max.Voltage: 12V; Rated Thermal Current: 20mA
- Insulation Resistance: 10M ohm; Max.Temperature Resisting: 80C
- SW-420 is a single roller type omnidirectional induction trigger switch. This product can sense vibration and tilt in different directions.
- This product is completely sealed and can be waterproof and dustproof. Suitable for tilting and vibration induction triggering of small current circuits.
- The vibration sensor has been widely used in electric alarms in recent years because it simplifies the complicated structure of buzzer and magnet plus spring used in the conventional alarm.
Tags:dingo
Title - Default Title