uxcell MR104ZZ Deep Groove Ball Bearings 4mm Inner Dia 10mm OD 4mm Bore Double Shielded Chrome Steel Z2 20pcs
NOTE：Please refer to the picture and select right type of bearings before your order (Sealed or Shield on BOTH or SINGLE side of the bearing). Suffix on the bearing just for differentiating between Sealed and Shield type of bearing. It would not affect the use of our product. Description:Single-row, pre- lubricated, normal accuracy.Deep Groove Ball Bearings are one of the most widely used rolling bearings. They are used to accommodate radial and axial loads in both directions.With small friction and high-limit speed, Ball Bearings are cost-effective and require little maintenance.These cost- effective bearings are widely used in areas with low requirements for Mohs hardness.Suitable for all kinds of industrial equipment, micro motor, small rotary motor, office equipment and so on. Selecting Guide:Shields (Designation Suffix Z/ZZ) - High speed. Protect from dirt and debris.Sealed (Designation Suffix RS/2RS) - Made of sheet steel reinforced nitrile butadiene rubber (oil- and liquid-resistant). Lower limit speed than Shield Bearings. Specification:Model: MR104ZZSeal Type: Double ShieldedInner Race/Outer Race Material: Chrome Steel (GCr15)Cage Material: Stamping SteelInner Diameter (d): 4mmOuter Diameter (D): 10mmThickness (B): 4mmDynamic Load Rating (Cr): 604NStatic Load Rating (Cor): 218NAccuracy Class: P0 (ABEC-1)Noise Level: Z2Number of Pack: 20 Pcs
Product Features
- MR104ZZ (I.D.=4mm, O.D.=10mm, Thickness=4mm)
- mr104zz bearings are Shielded on BOTH SIDES to keep lubricant in
- Made from Chrome Steel (GCr15), durability and resistance to under heavy loads
- ABEC Tolerance 1 (P0), Z2 Noise Level for most general use
- Static load rating of 218 newtons and dynamic load rating of 604 newtons
Tags:industrial2
Title - Default Title