Virtual Oscilloscope Portable Dual-Channel Oscilloscope with Spectrum Analyzer 13MHZ Signal Generator 4 Channel Logic Analyzer USB PC Virtual Oscilloscope Bandwidth
Specification: Application: 1. General and precise testing. 2. Embedded in teaching equipment or industrial test system. 3. Detection of power ripple and noise. 4. Multi-sensor system and serial bus decoding. 5. Analog data acquisition and secondary development and application of digital IO control project. 6. Voltage/current data recording and analysis of solar energy system and lighting system. 7. Fault Diagnosis Tool for Field Maintenance Engineer. 8. Basic tools for DIY enthusiasts and creators Model: OSC482F Detail: OSC482M + 13M Hz Signal generator + 4 channels Logic analyzer. Input channels: 2 Maximum sampling rate: 50M S/s Bandwidth: 20M Hz Connector type: 2 channels with BNC sockets, 20 mm spacing. Vertical resolution: 8 Bit. Maximum sampling rate (S/s): 50M Bandwidth (-3 dB): 20MHz Input coupling: AC/DC. Input characteristics: 1MΩ || 25pF. PC OS requirements: For Windows XP/7/8.1/10 (32 bit and 64 bit). Overvoltage protection: ±60.0v (x1), ±600.0v (x10). (DC + AC peak) Triggering type: Rising/falling edge according to trigger level. Triggering mode: None, auto, normal, single. Pre-trigger capture: 50% of capture size. Automatic measurements: Maximum, minimum, average, RMS, frequency, period, positive pulse width, negative pulse width, duty cycle, rise time, peak-to-peak value, Deep measurement. Samples Interpolation: Linear or sin(x)/x. FFT: 1024 - 16k points. FFT window function: Rectangle, Hanning, Hamming, Blackman. Math: A+B, A-B, AxB, X-Y. Acquisition Modes: High Resolution mode / Peak detect mode. Waveform recording and playback: File format :.oscxxx. Record depth: 50 - 450 frames. File size: 6 MB - 20GB. Data logger Sampling Interval: 1 second to 1 hour. Data logger Record Duration: 1 minute - 72 hours.
Product Features
- This oscilloscope can be connected to PC for use, realizing PC large screen display, convenient for observation and maintenance.
- Supports Multiple Measurement Modes: This Digital Oscilloscope supports more than 20 automatic measurement functions and FFT spectrum analysis, support a variety of serial protocol decoding
- Allows Convenient Use: This PC USB Digital Virtual Oscilloscope is equipped with open hardware interface, which supports DIY module expansion and can be used with module logic analysis function.
- Allows Convenient Use: This Virtual Oscilloscope provides GPIO interface and software interface protocol for customer's secondary development
- 4 Channel Logic Analyzer: This Digital Oscilloscope is designed with the function of 13MHZ signal generator and the function of 4-channel logic analyzer, TTL level is easy to operate
Tags:dingo
Title - Default Title