WADEO CGA320 to TR21-4 Soda maker Co2 Tank Cylinder Direct Adapter with 60 inches High-Pressure Hose, Soda Maker direct Connector for Soda Club
Specification: Hose length: 60 Inch/150cm Working pressure: 4500 PSI Thread For Large Co2 Tank: CGA320 G1/2-14. How it works: 1.Screw the Nut to a commercial Co2 gas cylinder and tighten it by wrench; 2.The black pin valve screwed into Soda machine; 3.Open the valve of the large gas bottle; 4.Done,you can enjoy your sparkling water. if you want unscrew the pin valve from the machine: 1.Close valve of the large gas bottle; 2.Press button more several time to drain residual Co2(if you disconnect the coupler directly without this step, the o ring in quick coupler will be blew out); 3.Disconnect the quick coupler. IMPORTANT NOTE: Please kindly read before you ordering or using: 1.Don't use siphon tube Co2 Tanks!! Our unit works with GAS Co2 only, not liquid Co2. liquid Co2 will create a bad taste in your drink. 2.if you want disconnect the coupler, please press the machine button more serval time to drain residual gas, or else the o ring in coupler will be blew out.
Product Features
- PREMIUM QUALITY : The standard CGA-320 external hose is made of high-quality nylon + TPU + fiber material, which has the advantages of anti-rust, anti-corrosion, wear resistance, anti-aging, not easy to deform, etc. Through the upgrade design, the air tightness is improved and the problems of tube explosion and tube expansion are avoided. . Working pressure meets 4500 psi.
- HIGH-QUALITY ADAPTER : Our cga320 connector hose is 60inch long, which included a fastening fasteners to prevent the product from loosening and ensure airtightness. and it can withstand up to 100 C (212 F). The rubber ring is made of food grade material, which is safe and reliable. It will not transmit chemical taste to carbonated water, and it can provide better air tightness.
- WIDE APPLICATION : This cga320 to tr21-4 hose fit for standard CGA-320 large Co2 tanks and most soda machines. It is very easy to install, the system allows you to connect your Soda-Club / Machine to an external Non-Siphon Co2 Tank that has a CGA-320 Outlet Valve, like 5lb, 20LB or 50lb commercial Co2 tank. For better air tightness, please use a wrench to tighten the connection with Co2 storage tank.
- ATTENTION : If your product has been in use for a while and you find leak, it may be the gasket was worn, please don't worry for that , Our product provides you with three spare gaskets, you can replace it by a new gasket. If you're not 100% satisfied with our product, please do not hesitate to contact us and we will give you a best solution.
- PACKAGE INCLUDED:1* 60inch cga320 to tr21-4 adapter hose, 3* joint rings, 1 * operating manual.
Tags:workwarehouse
Title - Default Title