Wire Tracker RJ11 RJ45 Cable Toner Line Finder Multifunction Wire Tracer Ethernet LAN Network Cable Collation Telephone Line Tester Continuity Checking with RJ11 Adapter, Toolkit, eBook

2024-03-21 11:24:08









Wire Tracker RJ11 RJ45 Cable Toner Line Finder Multifunction Wire Tracer Ethernet LAN Network Cable Collation Telephone Line Tester Continuity Checking with RJ11 Adapter, Toolkit, eBook

Mykit, Your Tool Kit, committed to providing practical and durable testing tools. Mykit Multifunction Wire Tracker Ethernet Cable Telephone Line Tracking Tester Continuity Checking Verifying Correct Wiring for Cat 5/Ethernet Runs Advantages: 1. Compared with other similar tools, our receiver has a built-in LED spotlight for dark places. 2. RJ11 cable adapter available, which is lacking in most of other offers. 3. Portable pouch for taking this instrument out for work. 4. eBook and Video Tutorials provided on request. Note: 1. Unlike the SCAN and Network functions, the TONE and CONT LEDs are not function indicators. They will not light on when you turn the knob to TONE or CONT function, but turn to different color or bright level based on the measuring result. 2. Do not use it to test the metal wire with under the current, power off first, or the current will destroy the tester chip. 3. Requires 2 pcs 6F22/9V batteries (not included). Scan Mode - Ethernet Cable or Telephone Line Tracking Plug an Ethernet cable into the RJ45 connector on the transmitter unit, or telephone line into the RJ11 connector.Turn the function rotary knob to SCAN position. When the transmitter is in SCAN mode, it sends an alternating high/low tone on the cable.Turn on the receiver by pressing the ON/OFF button. A red light power light will illuminate.Press and hold SCAN on the receiver and listen for an alternating signal, which the transmitter sends on the Ethernet cable or telephone line. Use the probe to find the same high/low signal from among plenty of cables to find the target cable in the other end. Read more Network Mode - Verifying Correct Wiring Plug the two ends of an Ethernet cable into both the transmitter and receiver RJ45 ports, pressing test will start a test sequence.Turn the transmitter function rotary knob to Network position, pressing TEST button on the transmitter will start a test sequence.A correctly wired cable will sequence from 1 to 8, 1 to 8, ad infinitum. Both the transmitter and receiver should sequence in the same order for standard Ethernet. G is ground, and if a cable grounded on both ends, the G should light before starting over at 1 again.According to the sequence indicators, get the network cable collation result. If there will be 2 or more indicators lights on simultaneously, the quantity of lights indicates the quantity of short circuit. If open circuit, the corresponding sequence line indictor will not light on. Read more TONE Mode - Testing Telephone Line Polarity or Working Status This function only uses the transmitter. Turn the transmitter function rotary knob to TONE position. The TONE LED will not light on at this time.Use the alligator cable in the RJ11 port of the transmitter to test for telephone lines. The TONE LED will light up red or green depending on polarity between the tip and ring of a phone line pair.If TONE LED is red, it means the red clip is connected with tip line, the black clip is with ring line. If green, the red clip is with ring line, the black clip is with tip line.When the red clip is connected with ring line and black with tip line: The TONE LED will flash if the telephone line is ringing;The TONE LED will go out if the telephone is taken off hook;The TONE LED will turn green if the telephone line is idle. Read more CONT Mode - Continuity Checking in Circuits Turn the transmitter function rotary knob to CONT position. The CONT LED will not light on at this time.The alligator clip cable needs to be plugged into the RJ11 port, will NOT work when plugged into the RJ45 port. Connect the alligator clip cable with the test line.The CONT LED will light on green if the test line is continuous. The green light will fade away as resistance increases, and will be hard to see by 220k ohms. Application Range: Server room maintenanceNetwork maintenanceTelephone installationSecurity monitor installationNetwork installationIndoor wiring Packing List: 1 x Transmitter1 x Receiver1 x RJ45 Cable Adapter1 x RJ11 Cable Adapter1 x Alligator clip cable Adapter1 x User Manual1 x Toolkit Read more Analog Tone and Probe Digital Tone and Probe Tone Generator ✓ ✓ Analog Signal ✓ Digital Signal ✓ Tracing Probe Noise Non Filtered Probe Noise Filtering Probe Trace Ethernet Cable ✓ ✓ Trace Telephone Line ✓ ✓ Cable Tester ✓ ✓ Test Telephone Line Status ✓ Zipper Pouch ✓ ✓

Product Features

  • [Professional Wire Tracker] This instrument is a multi-functional handheld cable testing tool. It has wide application with reinforced cable types and multiple functions. It is a necessary testing tool for telecommunication engineering, wire engineering and network maintenance person
  • [Wire Tracing] The capable of quickly finding the required line pairs among numerous ones. It is adaptable to network cable RJ45 terminal, telephone line RJ11 terminal, and other metal wires via the provided clip adapter
  • [Network Cable Collation] Tests physical connection status of network cable, such as open circuit, short connection, miswire and reverse connection
  • [Line Level test, and Status of Telephone Line Test] The emitter can be used to judge Line Level, Positive and Negative Polarity, TIP and RING line, and whether the telephone line is idle, ringing or off-hook
  • [Continuity Checking] This tool can check continuity of the tested wire. NOTE: The TONE and CONT indicators do not indicate the working status but the measuring result

Tags:dingo

Title - Default Title

如果有任何关于网站的意见,可以QQ联系或者发邮箱。

tags - tags - tags - tags - tags - tags - tags - tags - tags - tags - tags - tags - tags - tags - tags -