XIM SP-LAMP-083 Replacement Projector Lamp with Housing for Infocus IN126ST IN124ST IN122ST Projectors
Projector Lamp Type: Projector lamp with Housing Compatible with Projector models: Infocus IN112 IN114 IN116 IN114ST Projectors Read more Step 1. Unplug the power cord from your projector and let the lamp cool down. Step 2. Locate the lamp access panel on your projector and remove the screws and access panel. Step 3. Remove any screws holding the lamp housing into the projector. Step 4. Reach in and firmly pull the lamp housing out of the projector. Step 5. Place the new lamp housing into the projector in the same orientation as you removed the old lamp. Step 6. Wiggle the lamp into place and make sure full contact is made inside of the projector. Step 7. Replace the lamp mounting screws to secure the lamp into the projector. Step 8. Replace the lamp access panel and secure the screws. Step 9. Plug in your projector and power it on. Step 10. Reset the lamp counter. Some lamps will reset the lamp counter automatically when a new lamp is placed in Read more Where is My Projector Lamp Located : A projector lamp can be found by locating a square or rectangular plastic plate somewhere on the outside of the projector; the plate is usually on the bottom of the projector, but can sometimes be found on the top or sides. This cover is usually secured by two screws; undo these screws and lift the plate off to reveal the bottom of the plastic housing (the module) that holds the projector lamp in place in your projector. This plastic housing usually has a handle attached to it. Pull gently on this handle to remove the projector lamp from your projector. It is time to replace the lamp when: Picture has become dull and lacks brightness. There is an obvious decline in picture clarity and sharpness. Your lamp is flickering. There is difficulty or a delay when turning the machine on. A light comes on that warns you that it may be time to change your lamp. Note: 1. Let the lamp cool down before replacing it. If the lamp breaks, handle the shards carefully to avoid injury. 2. Do not touch the glass portion of the lamp assembly. Touching the glass could result in premature lamp failure. 3. Be sure to seat the lamp fully and secure the lamp cover. If the lamp is not properly installed or the cover is loose, the lamp will not turn on. Read more
Product Features
- P-LAMP-083 Replacement Projector Lamp with Housing for Infocus IN126ST IN124ST IN122ST Projectors
- We have the lowest prices in the market for projector lamps made by our own factory
- If you have any problem in installing the lamp or bulb please fell free to contact, we get the professional team to help
- A full manufacturer warranty is given on all of our Infocus projector lamps and bulbs for your peace of mind when shopping with us
- Included with every lamp we sell is our famous 150-Day Guarantee. If you order a projector lamp from our company and you are not satisfied for any reason, you may send the projector lamp back for a *full refund or an exchange.
Tags:cocoon
Title - Default Title